B-Line Eaton series fiberglass accessories, 4, Replacement clamp for type 4X wall and floor mount, Stainless steel, Door clamp kit, Wall mounting, Ac

The N4XCK2 is a replacement door clamp kit for Eaton B-Line series fiberglass enclosures of the type 4X wall mount and floor mount style. It is the clamping hardware that pulls the door tight against the gasket, not a latch or a hinge. Order it when a clamp is broken, corroded, or missing and the door will no longer seal.

The clamp kit is stainless steel, which is why it is specified on type 4X fiberglass enclosures, and it carries a NEMA 4 degree of protection rating. That makes it appropriate for outdoor and hose-down locations where a plated steel clamp would rust and eventually stop drawing the door closed.

It is sold as the replacement clamp for Eaton B-Line series fiberglass type 4X wall and floor mount enclosures. Clamp geometry follows the flange of that specific enclosure line, so match it to a B-Line fiberglass 4X body. For a different manufacturer's enclosure or a sheet steel box, get the clamp from that enclosure's own parts list.

The clamp itself is rated to NEMA 4 and is the factory part for the 4X fiberglass wall and floor mount enclosures, so replacing a damaged clamp with it keeps the door hardware to the original specification. The seal still depends on the gasket being intact and every clamp position being filled, so inspect the gasket at the same time and replace all clamps that no longer draw tight.

It covers the wall mount and floor mount versions of the type 4X fiberglass enclosures, with wall listed as the mounting method. One part number serves both, so you do not need a separate clamp for a floor-standing body.

Published dimensions are 8 in height, 7 in length/depth, and 1.011 in width, at .194 lb. The narrow width is the clamp body itself; use it to confirm you have clearance at the enclosure flange before ordering.