Eaton B-Line series mounting panels, NEMA 12, Stainless steel, Small enclosure, Wall mounting, Clamp and padlock kits clamps
Manufacturer Resources
Product Specs
- Certifications:
- CSA C22.2.
- Degree Of Protection:
- NEMA 12
- Mounting Method:
- Wall
- Product Category:
- Clamp & padlock kits
- Product Height:
- 3 in
- Product Length Depth:
- .5 in
- Product Weight:
- .199 lb
- Product Width:
- 3 in
- Department:
- Electrical
- Product Type:
- Small enclosure
- Product Details:
- Small enclosure
- Product Style:
- JIC swing panel kit
- Product Material:
- Stainless steel
B-LINE N12CK2 – Frequently Asked Questions
1) Is the B-Line N12CK2 a mounting panel or a clamp kit?
N12CK2 is a clamp and padlock kit component, not a sheet steel back panel. It's the hardware that clamps a small NEMA 12 enclosure door closed and gives you a padlock point. The part is stainless steel and measures 3 x 3 x .5 inches, weighing .199 lb, so it is a piece of door hardware rather than an interior panel you mount devices on.
2) Will the N12CK2 clamp keep my enclosure's NEMA 12 rating?
Yes. The N12CK2 clamp kit is rated to NEMA 12, so it's intended for dust-tight, drip-tight wall-mounted enclosures and does not downgrade a NEMA 12 box. It is not a wash-down or outdoor rating, so if the enclosure is exposed to hosing or weather you need hardware rated for that duty instead.
3) Can I padlock a small B-Line enclosure shut with the N12CK2?
Yes, that's the point of the kit. The N12CK2 is a clamp and padlock kit, so it both draws the door tight against the gasket and provides a hasp point for a padlock. Maintenance groups use that to lock out control enclosures on the plant floor. Padlocks themselves are bought separately.
4) Is the B-Line N12CK2 stainless, and will it hold up in a food plant or damp indoor area?
The clamp is stainless steel, which is why it gets specified for food processing, pharma, and damp indoor plant areas where painted steel latches rust at the door edge. The rating is NEMA 12 though, so it suits dust and dripping water, not direct hosing.
5) Is the N12CK2 CSA approved for a Canadian installation?
It carries CSA C22.2 certification, so it can go into work being inspected to the Canadian Electrical Code as part of a NEMA 12 enclosure assembly.
6) What exact part number do I order for the B-Line NEMA 12 stainless clamp kit?
Order Eaton B-Line N12CK2. That is the manufacturer part number for the stainless steel NEMA 12 clamp and padlock kit for small wall-mount enclosures, and it is the only configuration offered, so there are no finish or size options to specify.
7) How does the N12CK2 relate to a JIC swing panel kit?
B-Line lists the N12CK2 under its JIC swing panel kit style, the hardware family used with JIC-style industrial control enclosures. If what you actually need is the swing-out panel that devices mount to, that is a different part; N12CK2 is the clamp and padlock hardware in that family.
How fast can I get the B-LINE N12CK2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE N12CK2 come with a warranty?
Absolutely. The B-LINE N12CK2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE N12CK2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE N12CK2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.