Eaton B-Line series Flex tray wire basket tray, Food preparation and wash down areas applications, Stainless steel, Steel, 47.5" actual area inside tray, 2" deep flex tray
Manufacturer Resources
Product Specs
- Application:
- Food preparation and wash down areas applications
- Certifications:
- CE
- Product Height:
- 2.38 in
- Product Length Depth:
- 118.312 in
- Product Weight:
- 23.5 lb
- Product Width:
- 24 in
- Special Features:
- 47.5" area inside tray
- Department:
- Electrical
- Product Type:
- 2" deep flextray
- Product Finish:
- Stainless steel
- Product Details:
- 2" deep flextray
- Product Material:
- Steel
B-LINE FT2X24X10 SS – Frequently Asked Questions
1) Is the B-Line FT2X24X10 SS wire basket tray suitable for food prep and washdown areas?
Yes. Eaton B-Line's FT2X24X10 SS flex tray is specified for food preparation and washdown area applications, and it carries a stainless steel finish over steel construction, which is why it is put in wet, frequently cleaned spaces rather than a painted or plated tray.
2) How wide is the B-Line flex tray FT2X24X10 SS and how much cable width do I actually get inside it?
The tray is 24 inches wide overall, and the usable area inside the tray measures 47.5 inches. Height is 2.38 inches on a 2 inch deep flextray profile, so plan your cable fill depth against the 2 inch basket depth, not the overall height.
3) Is the stainless flex tray CE marked?
The FT2X24X10 SS carries a CE certification. That is the only marking held on record for it, so if your facility spec calls out another listing, confirm it against the manufacturer's submittal before you issue the PO.
4) Why pick a stainless steel basket tray over a standard galvanized one in a kitchen?
Washdown chemicals and constant moisture are what kill a plated or painted tray. This B-Line section is steel with a stainless steel finish and is specified for food preparation and washdown areas, so it holds up to the routine sanitation cycles that a general-purpose tray is not intended for. In dry back-of-house or electrical room runs, a standard finish tray is the usual choice.
5) What is the exact part number to order this 24 inch stainless B-Line flex tray?
Order Eaton B-Line part number FT2X24X10 SS. That designation reads out as the 2 inch deep flextray, 24 inch width, 10 foot nominal length, stainless steel. Matching that full string matters, since the same family is built in several widths and depths.
6) How much does a section of this basket tray weigh for hanger and seismic calcs?
23.5 pounds per section as supplied, across the 118.312 inch length. That is the empty tray weight only; your support load calculation still has to add the cable fill the run will carry.
How fast can I get the B-LINE FT2X24X10 SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT2X24X10 SS come with a warranty?
Absolutely. The B-LINE FT2X24X10 SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT2X24X10 SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT2X24X10 SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.