B-Line Eaton series Flex tray wire basket tray, Food preparation and wash down areas applications, Stainless steel, Steel, 79.5" actual area inside tr

That is exactly what this Eaton B-Line Flex Tray is specified for. The FT4X20X10 SS is called out for food preparation and wash down area applications, and it comes in a stainless steel finish so it stands up to routine washdown and sanitizing rather than a painted or plated cable tray that would corrode in that environment.

It is a 20 inch wide, 4 inch deep flex tray. The usable cross section is published as 79.5 square inches of area inside the tray, which is the number to use when you are sizing fill for your cable bundles rather than the nominal 4 x 20 dimensions.

A section weighs 23.52 lb empty. That is the dead load per stick before cable, so size your rod, trapeze, or wall bracket spacing for that plus the cable weight you are filling the 79.5 square inch interior with.

The material is listed as steel with a stainless steel finish. For a kitchen or washdown room that is the corrosion-resistant option in the Flex Tray line, but if your spec sheet demands a specific alloy callout such as 304 or 316, confirm the alloy against the Eaton B-Line series designation before you submit it.

What ships is the tray section itself, a 20 inch wide by 4 inch deep stainless basket, 118.312 inches long. Splice hardware, hold-down clamps, and trapeze or wall support hardware are separate line items, so add them to the order along with enough sticks to cover your run.

Basket tray like this 4 inch deep Flex Tray is the choice where you want cable to drain and dry and where you are adding or pulling circuits over time, which is typical over food prep and washdown areas. Solid bottom or ventilated ladder tray is the better pick when you need physical shielding of the cable from falling debris or a continuous surface under the bundle. Since this one is stainless finished specifically for washdown duty, it is aimed at the sanitation-heavy rooms rather than dry back-of-house runs.

Order Eaton B-Line part number FT4X20X10 SS. The number reads out as Flex Tray, 4 inch deep, 20 inch wide, 10 foot length, stainless steel.

It carries the CE marking. That is the only certification published for the FT4X20X10 SS, so if your project requires a specific listing beyond CE, verify that separately against the submittal for the Flex Tray series.