Eaton B-Line series Flex tray wire basket tray, Food preparation and wash down areas applications, Stainless steel type 304, Steel, 8.2" actual area inside tray, 2" deep flex tray
Manufacturer Resources
Product Specs
- Application:
- Food preparation and wash down areas applications
- Certifications:
- CE
- Product Height:
- 2.38 in
- Product Length Depth:
- 118.312 in
- Product Weight:
- 8.2 lb
- Product Width:
- 4 in
- Special Features:
- 8.2" area inside tray
- Department:
- Electrical
- Product Type:
- 2" deep flextray
- Product Finish:
- Stainless steel type 304
- Product Details:
- 2" deep flextray
- Product Material:
- Steel
B-LINE FT2X4X10 304LSS – Frequently Asked Questions
1) Can this Eaton B-Line flex tray be used in a commercial kitchen or wash down area?
That is exactly what it is specified for. Eaton B-Line lists the FT2X4X10 304LSS for food preparation and wash down areas, and it is built in type 304 stainless steel so it tolerates the moisture and frequent cleaning those spaces get. A painted or pre-galvanized basket tray is not the right call over food prep.
2) Is the B-Line FT2X4X10 tray solid stainless or stainless-plated steel?
The wire basket is steel in a type 304 stainless specification, so the corrosion resistance runs through the material rather than sitting on a coating that can be scratched through during install or cut to length in the field.
3) How much cable fill do I get in a 2 inch by 4 inch flex tray?
The usable cross section inside the basket is published as 8.2 square inches. Work your fill from that figure rather than from the 2 x 4 nominal size, since the wire mesh sides take up part of the envelope.
4) Does the B-Line stainless flex tray carry any listing or certification?
It carries CE certification. If your specification calls out a particular North American listing mark for the cable support system, confirm that against the mark required on your drawing before you release the order.
5) How much does a 10 foot section of the 2 x 4 B-Line flex tray weigh for handling and support layout?
A section weighs 8.2 lb. That is light enough for one electrician to set a full length onto trapeze or wall brackets without help, and it keeps the dead load on the supports minimal before you add cable.
How fast can I get the B-LINE FT2X4X10 304LSS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT2X4X10 304LSS come with a warranty?
Absolutely. The B-LINE FT2X4X10 304LSS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT2X4X10 304LSS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT2X4X10 304LSS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.