B-Line Eaton series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 31.5" actual area inside tray, 4" deep fl

The Eaton B-Line FT4X8X10 GS is a 4 inch deep by 8 inch wide wire basket tray supplied in a length of 118.312 inches, which is just under 10 feet. Overall height measures 4.38 inches and each section weighs 14.32 lb, light enough for one person to set on trapeze hangers.

No. The pre-galvanized zinc finish on this steel basket tray is rated for limited industrial and interior use. Pre-galv is mill-coated before fabrication, so cut ends and welds are left bare, which is fine in a dry data room, telecom closet or conditioned plant ceiling but not for exterior runs, washdown areas or corrosive process spaces. For those, specify a hot-dip galvanized after fabrication or stainless basket instead.

Wire basket like the 4 inch deep FlexTray is the usual choice for low voltage and data because the open mesh lets you drop cable in anywhere along the run, gives constant ventilation, and can be field cut and bent around obstructions instead of ordering fittings. Ladder and solid bottom tray suit heavy power feeders and situations needing cable support at defined rung spacing or physical/EMI shielding. At 8 inches wide with 31.5 square inches of interior area, this size is aimed at branch and riser data runs rather than large feeder bundles.

What ships is the basket section itself, one 118.312 inch length of pre-galvanized steel tray. Splice connectors, wall brackets, trapeze or center-hung supports, threaded rod and end caps are separate line items, so add them to the order based on your support spacing and the run length.

Yes, this FlexTray basket carries a CE certification. That is the rating on record for it; if your submittal calls for anything beyond CE, confirm against the Eaton submittal sheet for the FT4X8X10 GS before release.