B-Line Eaton series Flex tray ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$483.44

B-Line Eaton series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 47.3" actual area inside tray, 6" deep fl

(No reviews yet) Write a Review

Model: FT6X8X10 GS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$483.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton B-Line series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 47.3" actual area inside tray, 6" deep flex tray

Manufacturer Resources

Product Specs

Application:
Limited industrial and interior
Certifications:
CE
Product Height:
6.38 in
Product Length Depth:
118.312 in
Product Weight:
17.39 lb
Product Width:
8 in
Special Features:
47.3" area inside tray
Department:
Electrical
Product Type:
6" deep flex tray
Product Finish:
Pre-galvanized
Product Details:
6" deep flex tray
Product Material:
Steel

B-LINE FT6X8X10 GS – Frequently Asked Questions

1) Can I use pre-galvanized wire basket tray outdoors or in a wash-down area?
No. The FT6X8X10 GS carries a pre-galvanized zinc finish on steel and is rated for limited industrial and interior use. Pre-galv is a mill coating on the sheet before forming, so cut ends and welds are the weak point in wet or corrosive air. For exterior runs, roof decks, or wash-down, specify a hot-dip galvanized or stainless basket tray instead.
2) Does the B-Line FT6X8X10 GS come with splice hardware and supports?
The FT6X8X10 GS is the tray section itself, model FT6X8X10 GS, 8 inches wide and 118.312 inches long. Splice connectors, hold-down clamps, trapeze or wall-bracket supports, and any bonding jumpers are separate line items, so order them with the tray to finish the run.
3) Can wire basket tray be cut and bent on site for offsets and elbows?
Yes, that is the point of a flex tray. The welded steel wire basket is field cut with a bolt cutter or cable cutter and the wires bent to form elbows, tees, and vertical offsets, so you are not ordering fabricated fittings for every direction change. Because the finish here is pre-galvanized, dress any cut ends and consider a cold galvanizing touch-up.
4) I need to match existing basket tray in my building. What do I specify to get the same part?
Order by model FT6X8X10 GS. That breaks down as flex tray, 6 inch depth, 8 inch width, 10 foot nominal stick (118.312 inches actual), GS for the pre-galvanized steel finish. If the existing tray in the building is a different width or a hot-dip finish, the model number will differ even though it looks the same on the hanger.
How fast can I get the B-LINE FT6X8X10 GS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT6X8X10 GS come with a warranty?
Absolutely. The B-LINE FT6X8X10 GS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT6X8X10 GS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT6X8X10 GS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.