B-Line Eaton series Flex tray ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$653.89
B-Line Eaton series Flex tray wire basket tray, Reended for exterior and corrosive applications, Hot-dip galvanized, Steel, 4.3" actual area inside tr

B-Line Eaton series Flex tray wire basket tray, Reended for exterior and corrosive applications, Hot-dip galvanized, Steel, 4.3" actual area inside tr

(No reviews yet) Write a Review

Model: FT2X2X10 HD
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$653.89
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Flex tray wire basket tray, Recommended for exterior and corrosive applications, Hot-dip galvanized, Steel, 4.3" actual area inside tray, 2" deep flex tray

Manufacturer Resources

Product Specs

Application:
Recommended for exterior and corrosive applications
Certifications:
CSA
Product Height:
2.38 in
Product Length Depth:
118.312 in
Product Weight:
6.6 lb
Product Width:
2 in
Special Features:
4.3" area inside tray
Department:
Electrical
Product Type:
2" deep flextray
Product Finish:
Hot-dipped galvanized
Product Details:
2" deep flextray
Product Material:
Steel

B-LINE FT2X2X10 HD – Frequently Asked Questions

1) Can B-Line FT2X2X10 HD wire basket tray be used outdoors or in a wash-down / corrosive area?
Yes. The FT2X2X10 HD Flextray is hot-dipped galvanized steel and is recommended for exterior and corrosive applications, so it suits rooftop runs, parking structures, tunnels, and chemical or wash-down areas where an electro-zinc or pre-galvanized basket would rust out.
2) What size basket tray is FT2X2X10 HD, and how much cable area do I actually get?
It is a 2 inch deep by 2 inch wide Flextray section with 4.3 square inches of usable area inside the tray. Overall height is 2.38 inches, which is the figure to use for clearance above ceilings or under raised floors, not the nominal 2 inch depth. That small a cross section is sized for a modest branch or low-voltage bundle, not a main backbone run.
3) What is the exact part number to order this Eaton B-Line hot-dip galvanized Flextray?
Order Eaton B-Line part number FT2X2X10 HD. The HD suffix is the hot-dip galvanized finish, and FT2X2X10 reads as Flextray, 2 inch depth, 2 inch width, 10 foot length. If a distributor quotes you FT2X2X10 without HD, that is a different finish and will not hold up in the exterior or corrosive service this one is recommended for.
4) Is this B-Line Flextray approved for use on a Canadian job?
The FT2X2X10 HD carries CSA certification, so it can be specified on work in Canada as well as in the US.
5) Should I use wire basket tray like this or solid-bottom cable tray for my run?
Wire basket like the Flextray is an open mesh, so it sheds water and dust, drops heat out of the bundle, and lets you drop cable out anywhere along the run with hand tools. That open design is also why the hot-dip galvanized finish matters outdoors, since every cut wire end is exposed. Choose solid-bottom or ventilated trough instead when you need physical protection of the cable, a barrier between power and data, or the spec calls for a closed raceway. For a 2 inch by 2 inch basket in particular, this is a branch or low-voltage pathway, not a spine.
6) Can I form elbows and offsets from this tray instead of buying fittings?
Yes, that is the point of a wire basket system. The steel mesh is cut and bent on site with a bolt cutter or basket tray cutter to make bends, tees, and drops, so you do not stock a fitting for every direction change. Deburr or cap cut ends, and on this hot-dip galvanized version treat field cuts, since cutting exposes bare steel in an exterior or corrosive location.
How fast can I get the B-LINE FT2X2X10 HD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT2X2X10 HD come with a warranty?
Absolutely. The B-LINE FT2X2X10 HD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT2X2X10 HD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT2X2X10 HD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!