You may also like
Eaton B-Line series Flextray wire basket tray, 4" X 4", Steel, Stainless steel type 316, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- .098 lb
- Product Width:
- 4 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Stainless steel type 316
- Product Details:
- Blind ends
- Product Material:
- Steel
B-LINE FT BE 4X4 SS6 – Frequently Asked Questions
1) What size Flextray does the B-Line FT BE 4X4 SS6 blind end fit?
The FT BE 4X4 SS6 blind end is sized for a 4 inch wide by 4 inch deep Flextray wire basket run. Both the height and width are 4 inches, so it caps a 4x4 tray section and nothing larger. If your run is a different width or depth, you need the blind end matched to that tray size.
2) Is this Flextray blind end suitable for a washdown or corrosive area?
Yes. The FT BE 4X4 SS6 is steel with a type 316 stainless finish, which is the grade specified for chemical, food processing, coastal and washdown environments where standard zinc plating corrodes. If your run is plated steel rather than stainless, mixing a 316 end onto it still works mechanically but you lose the corrosion benefit at the rest of the tray.
3) Is the B-Line Flextray blind end UL listed and CSA compliant for an electrical inspection?
The FT BE 4X4 SS6 blind end carries a UL Classified marking and CSA compliance. That is the documentation to hand an inspector when a wire basket run terminates with a capped end in a commercial or institutional install.
4) What does a blind end do on a wire basket cable tray run?
A blind end caps the open cut end of a Flextray wire basket run. It covers the exposed wire ends left after the tray is field-cut to length, so cable jackets are not dragged across sharp stubs during pulls and the termination looks finished. It is a termination accessory, not a splice or a fitting that continues the run.
5) How much does one B-Line 4x4 stainless blind end weigh for a tray load calculation?
Each FT BE 4X4 SS6 blind end weighs .098 lb, so even a large job with dozens of terminations adds a negligible amount to the supported load on the trapeze or wall bracket.
6) Do I order one blind end per tray run or two?
Order one FT BE 4X4 SS6 per exposed cut end. A run that dead-ends at a wall or panel needs one; a section cut free at both ends needs two. Count terminations on the drawing, not runs, when you build the takeoff.
How fast can I get the B-LINE FT BE 4X4 SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 4X4 SS6 come with a warranty?
Absolutely. The B-LINE FT BE 4X4 SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 4X4 SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 4X4 SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.