You may also like
Eaton B-Line series Flextray wire basket tray, Stainless steel, Steel, Center trapeze hanger
Manufacturer Resources
Product Specs
- Certifications:
- cULus Listed
- Product Height:
- 1.77 in
- Product Length Depth:
- 27.5 in
- Product Weight:
- 2.25 lb
- Product Width:
- .78 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Hangers
- Product Type:
- Center trapeze hanger
- Product Finish:
- Stainless steel
- Product Details:
- Center trapeze hanger
- Product Material:
- Steel
B-LINE FTB24CTSS6 – Frequently Asked Questions
1) Is the Eaton B-Line center trapeze hanger for wire basket tray a listed product for electrical inspection?
It is cULus Listed, so it carries listings recognized in both the US and Canada. That is the line an inspector or a spec writer looks for when the cable tray support system has to be a listed assembly.
2) Can I use the FTB24CTSS6 hanger on a 12 or 18 inch Flextray basket?
No. This one is built around the 24 inch tray width, with a 27.5 inch overall bar. Putting it under a narrower basket leaves the support points outboard of the tray side wires where they do nothing for you. Order the center trapeze hanger matched to the tray width you are actually installing.
3) Is the FTB24CTSS6 trapeze hanger stainless steel or plain steel?
Both terms appear on it for a reason: the base material is steel and the finish is stainless steel. That is the spec to quote when a job calls for a corrosion resistant support in a wash-down, food processing, marine or exterior run rather than a painted or pre-galvanized hanger.
4) What is the difference between a center trapeze hanger and a standard trapeze support for wire basket tray?
A center trapeze hanger picks the tray up at the middle of the span with the threaded rods dropping at or near the tray centerline, rather than using two outboard rods at the ends of a strut. It is what you use where an obstruction or adjacent trade does not leave room for a full-width trapeze, or where you want a single clean drop line down a corridor. For the 24 inch Flextray the part is the FTB24CTSS6.
5) Does the B-Line Flextray center trapeze hanger come with threaded rod and nuts?
What ships is the hanger itself, the stainless finished steel bar, 27.5 inches long. Threaded rod, rod couplings, nuts, washers and the structural anchors at the deck are ordered separately and sized to your span and load, so build those into the takeoff along with the hanger count.
6) How much does one FTB24CTSS6 hanger weigh for figuring support loads and shipping a full run?
Each hanger weighs 2.25 lb. On a long tray run with hangers spaced every few feet, that adds up fast when you are estimating dead load on the structure or palletizing a large order, so it is worth multiplying out before you commit the support schedule.
How fast can I get the B-LINE FTB24CTSS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FTB24CTSS6 come with a warranty?
Absolutely. The B-LINE FTB24CTSS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FTB24CTSS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FTB24CTSS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.