You may also like
Eaton B-Line series Flextray wire basket tray, Steel, Floor stand
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 2.5 in
- Product Length Depth:
- 11 in
- Product Weight:
- .4 lb
- Product Width:
- 2 in
- Department:
- Electrical
- Product Type:
- Floor stand
- Product Details:
- Floor stand
- Product Material:
- Steel
B-LINE FTA2FS – Frequently Asked Questions
1) What is the B-Line FTA2FS floor stand used for?
The FTA2FS is a steel floor stand accessory for Eaton B-Line Flextray wire basket cable tray. It supports a run of wire basket tray off the floor rather than off a wall or ceiling, which is how raised-floor and equipment-room runs are usually carried. It is an accessory only, sold as a single model FTA2FS, so the tray sections and the rest of the support hardware are separate line items.
2) Is the Eaton B-Line Flextray floor stand UL listed or CSA approved for an inspected job?
The FTA2FS floor stand is UL Classified and carries CSA compliance. For electrical inspectors on data center and equipment room work, that is the documentation normally asked for on cable tray support components.
3) Should I use a floor stand or a wall bracket to support Flextray wire basket?
It comes down to where the run is. A floor stand like the FTA2FS carries the tray up off the slab or subfloor, which is what you want under a raised floor or across an open equipment room where there is no wall or deck to anchor to. Wall brackets and ceiling trapeze hangers are the choice when the run follows a wall line or needs to clear the floor entirely for traffic. All three are Flextray accessories, not interchangeable in place, so pick per run section.
4) Does the FTA2FS come with the tray, or do I need to order Flextray sections separately?
Only the floor stand. FTA2FS is a single accessory piece, so the Flextray wire basket sections, splice hardware, and any floor fasteners are ordered on their own lines. Count one stand per support point along the run when you build the takeoff.
5) Is the FTA2FS steel or aluminum, and will it hold up in a plenum or equipment room?
Steel. The Flextray FTA2FS floor stand is a steel component, which is the heavier-duty of the two common wire basket support materials and what most indoor equipment rooms and raised-floor spaces get specified with.
6) What part number do I order for the Eaton B-Line Flextray steel floor stand?
Order it as FTA2FS, Eaton B-Line series Flextray. There is one configuration, so there is no finish or size option to specify with it.
How fast can I get the B-LINE FTA2FS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FTA2FS come with a warranty?
Absolutely. The B-LINE FTA2FS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FTA2FS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FTA2FS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.