You may also like
Eaton B-Line series Flextray wire basket tray, Steel, Hot-diped galvanized finish
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- .7 in
- Product Length Depth:
- .7 in
- Product Weight:
- 7 lb
- Product Width:
- .4 in
- Department:
- Electrical
- Product Finish:
- Hot-dipped galvanized
- Product Material:
- Steel
B-LINE FTA6HDSS6 – Frequently Asked Questions
1) Is the B-Line Flextray FTA6HDSS6 wire basket tray suitable for outdoor or wet/corrosive areas?
The FTA6HDSS6 is steel with a hot-dipped galvanized finish, which is the coating you want for exterior runs, parking structures, tunnels, wash-down areas and other damp or corrosive environments. Hot-dip covers cut ends and welds far better than a pre-galvanized or painted finish, so it holds up where an indoor electro-zinc tray would start showing rust.
2) Is the B-Line Flextray FTA6HDSS6 UL Classified and accepted in Canada?
Yes on both counts. The Flextray FTA6HDSS6 is UL Classified and carries CSA compliance, so it can be specified on jobs on either side of the border where the electrical inspector wants a listed cable tray system.
3) What is the exact part number to order this hot-dip galvanized B-Line Flextray piece?
Order it as Eaton B-Line part number FTA6HDSS6. The HDG in the description refers to the hot-dipped galvanized steel finish, which is the detail that separates it from the pre-galvanized and stainless versions of the same Flextray family, so quote the full part number rather than just the series name.
4) Is the FTA6HDSS6 a full tray section or an accessory for the Flextray system?
It is a Flextray wire basket tray component in hot-dipped galvanized steel. At roughly 7 lb and with published dimensions under an inch in two directions, it is a small-format piece rather than a long straight run section, so pair it with your Flextray straight lengths and hardware when you build the order.
5) Can I mix this hot-dip galvanized Flextray part with pre-galvanized tray in the same run?
You can mechanically, but be careful where the run is. Hot-dipped galvanized steel is specified for exposed and corrosive locations; a pre-galvanized section spliced into that same stretch becomes the weak point and will corrode first. Keep the finish consistent through any exterior or wash-down section and save the lighter finishes for dry indoor runs.
6) How much does the B-Line Flextray FTA6HDSS6 weigh for shipping and handling on site?
It is listed at 7 lb, so it is a one-hand piece for an electrician on a lift and does not need special handling to stage on a floor.
How fast can I get the B-LINE FTA6HDSS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FTA6HDSS6 come with a warranty?
Absolutely. The B-LINE FTA6HDSS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FTA6HDSS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FTA6HDSS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.