You may also like
Eaton B-Line series Flextray wire basket tray, Hot dip galvanized, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 1.77 in
- Product Length Depth:
- 4 in
- Product Weight:
- 1 lb
- Product Width:
- 8 in
- Department:
- Electrical
- Product Finish:
- Hot-dipped galvanized
- Product Material:
- Steel
- Product Length:
- 4 in
B-LINE 4 C BRKT HD – Frequently Asked Questions
1) Is the B-Line Flextray 4 C BRKT HD bracket suitable for outdoor or wet locations?
The finish is hot-dipped galvanized steel, which is the finish specified for exterior runs, parking structures, tunnels, and damp or corrosive interior areas. Pre-galvanized (electro-zinc) wire basket accessories are indoor-only by comparison, so if the tray run leaves conditioned space, the hot dip version is the one to order.
2) What size Flextray does the Eaton B-Line 4 C BRKT HD bracket support?
It is the 4 inch bracket in the Flextray line, matching a 4 inch tray width. The part itself measures 8 in by 4 in by 1.77 in and weighs about 1 lb. If your basket run is 6, 8, 12 or wider, this is not the bracket for it, order the bracket sized to that tray width.
3) Is the B-Line Flextray hot dip galvanized bracket UL Listed for electrical installs?
Yes, it carries a UL Listed marking, which is what most AHJs and institutional specs look for on cable tray support components. That matters on healthcare, education, and government jobs where every tray accessory in the run has to be a listed component.
4) How much clearance do I need behind a Flextray wall bracket?
Plan on roughly 4 inches of projection off the mounting surface, with a bracket profile about 1.77 in deep and 8 in across. In tight plenums or above a hard ceiling, measure that projection against your clear space before you set the anchor layout.
5) Does the Flextray bracket come with anchors or mounting hardware?
Treat it as the bracket only. Anchors, strut hardware, and the tray-to-bracket fasteners are selected to your substrate (concrete, block, steel stud, strut channel) and ordered separately. Match fastener plating to the hot-dip galvanized bracket so you are not mixing dissimilar metals on an exterior run.
6) Will this bracket work with a solid bottom or ladder cable tray?
No. It is a Flextray accessory, sized and shaped for wire basket tray. Ladder and solid bottom tray use their own connector and support hardware sized to the side rail height, so specify support components from that tray family instead.
7) Is the hot dip galvanized version the same part as the standard Flextray bracket?
Same 4 inch bracket geometry, different finish. The HD suffix on 4 C BRKT HD indicates the hot-dipped galvanized steel version rather than a plain or pre-galvanized one, so it is a direct substitution where the spec calls for a heavier corrosion finish.
How fast can I get the B-LINE 4 C BRKT HD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4 C BRKT HD come with a warranty?
Absolutely. The B-LINE 4 C BRKT HD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4 C BRKT HD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4 C BRKT HD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.