You may also like
Eaton B-Line series Flextray wire basket tray, Hot dip galvanized, Steel, Splice bar
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- .31 in
- Product Length Depth:
- 10.81 in
- Product Weight:
- .28 lb
- Product Width:
- 2 in
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Splice bar
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Splice bar
- Product Material:
- Steel
B-LINE SPLICE BAR HDG – Frequently Asked Questions
1) What does the Eaton B-Line Flextray splice bar actually do?
It joins two sections of Flextray wire basket tray end to end, bridging the run so the cable pathway stays continuous and electrically bonded. It is a steel bar, 10.81 in by 2 in by .31 in, weighing .28 lb, so one bar spans the joint and fastens to both tray sections. Part number is SPLICE BAR HDG.
2) Can this splice bar be used outdoors or in a wet plant environment?
The finish is hot-dipped galvanized over steel, which is the finish specified for exterior runs, parking structures, tunnels and washdown or high-humidity industrial areas. If your Flextray run is the plain electro-galvanized (pre-galv) version indoors, the hot dip splice bar will still bolt up, it just carries heavier corrosion protection than the tray around it.
3) Will this splice bar fit any brand of wire basket tray?
It is made for Eaton B-Line Flextray wire basket tray. Basket tray wire spacing and wire diameter vary between manufacturers, so treat this as a Flextray part and match your tray brand rather than mixing systems at a splice.
4) How many splice bars do I need per joint on a wire basket tray run?
Plan the count by joint, not by tray length. Each splice location gets bars on both sides of the tray, so a straight butt joint in a basket run typically takes a pair. Order by the number of joints in the run, then add spares for field cuts, because every cut you make in the field creates a new joint that needs splicing. The part orders as a single bar, SPLICE BAR HDG.
5) Does the splice bar handle a change in direction, or only straight joints?
The bar is a flat steel splice, 10.81 in long by 2 in wide and .31 in thick, for connecting tray sections together. Fittings and bends in a basket system are normally made by cutting and forming the tray itself, then splicing the formed section back into the run with the same hardware.
How fast can I get the B-LINE SPLICE BAR HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SPLICE BAR HDG come with a warranty?
Absolutely. The B-LINE SPLICE BAR HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SPLICE BAR HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SPLICE BAR HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.