You may also like
Eaton B-Line series Flextray wire basket tray, Steel, Zinc, 90" degree splice bar
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .4 lb
- Product Width:
- 9 in
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- 90" degree splice bar
- Product Finish:
- Zinc plated
- Product Details:
- 90" degree splice bar
- Product Material:
- Steel
B-LINE FTS9TBZN – Frequently Asked Questions
1) What does the B-Line Flextray FTS9TBZN splice bar actually do on a wire basket tray run?
FTS9TBZN is a splice bar for Eaton B-Line Flextray wire basket tray, used to join tray sections at a 90 degree change of direction so the run turns without cutting in a fabricated fitting. It is steel with a zinc plated finish, and one part number covers the single model offered.
2) Is the zinc plated splice bar suitable for outdoor or damp locations?
Zinc plated steel is an indoor, dry-location finish. For rooftop, exterior, or wash-down areas, specify a hot dip galvanized or stainless Flextray splice component instead, since zinc plating will not hold up to sustained moisture or corrosive exposure.
3) Do I need anything else to complete a 90 degree turn with this splice bar?
Plan on the tray sections themselves plus the splice hardware (bolts, nuts and washers) to fasten the bar to the wire mesh. The FTS9TBZN part covers the 90 degree splice bar only, so order fasteners and any additional straight splice plates for the rest of the run separately.
4) How is a 90 degree splice bar different from a straight splice plate?
A straight splice plate joins two tray sections end to end in line. The 90 degree bar is for where the run changes direction, holding the two cut section ends at a right angle so you can form the elbow in the field rather than buying a pre-made fitting. If your joint is a plain inline butt, you want a straight splice, not this part.
5) Will this splice bar work on any brand of wire basket tray?
It is built for the Eaton B-Line Flextray wire basket system. Wire diameter and mesh spacing differ between manufacturers, so match Flextray splice components to Flextray tray rather than mixing brands on a joint.
6) Can I order just one B-Line Flextray 90 degree splice bar, and what part number do I ask for?
The part number is FTS9TBZN, and it is the single model offered for the zinc plated 90 degree Flextray splice bar. That MPN is what to put on a purchase order or quote request.
How fast can I get the B-LINE FTS9TBZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FTS9TBZN come with a warranty?
Absolutely. The B-LINE FTS9TBZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FTS9TBZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FTS9TBZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.