You may also like
Eaton B-Line series Flextray wire basket tray, Washer stud and finned nut included, White powder coat, Steel, Washer split kit
Manufacturer Resources
Product Specs
- Application:
- Washer stud and finned nut included
- Certifications:
- UL Listed
- Product Height:
- 1 in
- Product Length Depth:
- .25 in
- Product Weight:
- .45 lb
- Product Width:
- .25 in
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Washer split kit
- Product Finish:
- White powdercoat
- Product Details:
- Washer split kit
- Product Material:
- Steel
- Product Length:
- 0.25 in
B-LINE WASHER SPL KIT WH – Frequently Asked Questions
1) What comes in the B-Line Flextray washer split kit?
The kit ships with a washer stud and a finned nut, so you get both halves of the splice fastener in one part number (WASHER SPL KIT WH). Nothing else is needed to make up the splice hardware itself.
2) Is the Flextray washer splice kit UL Listed for electrical installations?
Yes, the washer split kit is UL Listed, which is what inspectors look for on cable tray splice hardware in commercial and institutional electrical work.
3) Will the white washer splice kit match white Flextray wire basket tray?
Yes. The kit is finished in white powder coat to match white-finished Eaton B-Line Flextray wire basket tray, so the splice hardware doesn't stand out on exposed runs in ceilings, data rooms, or clean spaces.
4) How big is the Flextray washer stud and finned nut kit?
The kit's stated dimensions are 1 in height with .25 in width and .25 in length/depth, and it weighs .45 lb. That is small-diameter hardware sized to pass through wire basket tray mesh rather than bolt through a solid side rail.
5) Is this splice kit for wire basket tray or for solid-bottom cable tray?
Wire basket tray. It is the washer stud and finned nut hardware for Eaton B-Line series Flextray. Solid-bottom and ladder tray use bolted splice plates through the side rail instead, which is different hardware entirely.
6) What material is the B-Line washer split kit made from, and will it hold up in a commercial ceiling?
Steel, with a white powder coat over it. That gives you the load-carrying strength needed at a tray splice plus a painted finish for indoor commercial runs.
7) Do I need a special tool to install the finned nut on a wire basket tray splice?
The finned design is the point: the fins bite and hold the nut against the wire so you can drive the stud without needing to reach around and hold a wrench on the back side. It's a one-hand fastener for overhead tray work. Standard hand tools handle the stud.
How fast can I get the B-LINE WASHER SPL KIT WH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE WASHER SPL KIT WH come with a warranty?
Absolutely. The B-LINE WASHER SPL KIT WH is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE WASHER SPL KIT WH?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE WASHER SPL KIT WH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.