You may also like
B-Line Eaton series Grip Strut stair tread, 432" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 12 gauge
Model: BLN-T41512 36 GL
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 12 gauge steel
B-LINE
$646.17
B-Line Eaton series Grip Strut stair tread, 432" Grating length, 7" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 14 gauge
Model: BLN-T31514N 36 GL
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 7" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 14 gauge
B-LINE
$850.63
B-Line Eaton series Grip Strut stair tread, 432" Grating length, 7" Grating width, Steel, 2" Channel size, Mill-galvanized, Stair tread, 12 gauge
Model: BLN-T32012N 36 GL
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 7" Grating width, Steel, 2" Channel size, Mill-galvanized, Stair tread, 12 gauge
B-LINE
$972.14
B-Line Eaton series Grip Strut stair tread, 432" Grating length, 11.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 12 gaug
Model: BLN-T51512 36 GL
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 11.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 12 gauge steel
B-LINE
$719.47
B-Line Eaton series Grip Strut stair tread, 432" Grating length, 11.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 14 gaug
Model: BLN-T51514 36 GL
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 11.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 14 gauge steel
B-LINE
$611.44
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 7" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 12 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 1.5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 1.5 in
- Product Length Depth:
- 432 in
- Product Weight:
- 4.1 lb
- Product Width:
- 7 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE T31512 36 GL – Frequently Asked Questions
1) Is this Grip Strut stair tread OSHA compliant for an industrial catwalk or plant stairway?
Yes. The B-Line Grip Strut stair tread is listed as OSHA compliant and is intended for safe, sturdy footing where non-slip walking surface is required, which is the usual requirement on plant stairs, catwalks and mechanical platforms.
2) How tall is the channel on this Grip Strut tread, and will it clear my existing stringer bracket?
Channel size is 1.5 inches and the overall product height is 1.5 inches, so the tread needs 1-1/2 inches of vertical space below the walking surface at the stringer connection. Measure the clearance on your existing stringer angle or bracket against that 1-1/2 inch depth before you order.
3) Is mill-galvanized Grip Strut good enough for an outdoor exterior stair?
The finish on this tread is mill-galvanized steel, which is zinc coating applied to the coil before forming. It handles normal outdoor and damp industrial exposure, but the cut and punched edges created during fabrication are not re-coated, so in a heavy washdown, coastal or chemical environment you should be looking at a hot-dip galvanized-after-fabrication or stainless tread instead.
4) Does the B-Line Grip Strut stair tread come with mounting hardware or end plates?
What ships is the tread itself, model T31512 36 GL, in mill-galvanized 12 gauge steel. Stringer bolts, nuts and any end plate or carrier angle are separate items, so plan to order the fasteners and stringer attachment for your stair on the same job.
5) Why choose a Grip Strut plank tread over bar grating or diamond plate on a stairway?
Grip Strut is a formed plank with pierced, raised openings, so debris, water, ice and oil fall through and the serrated edges bite into the sole of a boot from any direction. Bar grating drains too but has a smooth bearing bar that goes slick when wet, and diamond plate holds water and grease on the surface. For a stair where non-slip footing is the requirement, the Grip Strut plank is the one specified.
6) What gauge steel is this Grip Strut tread and how heavy is it to handle on site?
It is 12 gauge steel at 4.1 lb, so one person can carry and set the tread without a lift. The 12 gauge material is the heavier of the common Grip Strut thicknesses, which is what you want for regular foot traffic and tool carts rather than occasional access.
7) What is the exact part number to order this 7 inch Grip Strut stair tread?
Order Eaton B-Line part number T31512 36 GL. That number covers the 7 inch wide, 12 gauge steel, mill-galvanized tread with a 1.5 inch channel.
How fast can I get the B-LINE T31512 36 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE T31512 36 GL come with a warranty?
Absolutely. The B-LINE T31512 36 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE T31512 36 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE T31512 36 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.