Eaton B-Line series Grip Strut stair tread, 432" Grating length, 9.5" Grating width, Steel, 2" Channel size, Stainless steel type 304, Stair tread, 16 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 16 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 432 in
- Product Weight:
- 3.2 lb
- Product Width:
- 9.5 in
- Department:
- Electrical
- Product Finish:
- Stainless steel type 304
- Product Material:
- Steel
B-LINE T42016 36 SS – Frequently Asked Questions
1) What size opening does the B-Line Grip Strut stair tread T42016 36 SS cover?
The Grip Strut tread measures 432 inches in grating length by 9.5 inches wide, with a 2 inch channel height. The 9.5 inch width is the tread depth underfoot, and the 2 inch channel is the side rail depth you need to clear at the stringer.
2) Is this Grip Strut stair tread OSHA compliant for an industrial stairway?
Yes. The B-Line Grip Strut tread is listed as OSHA compliant, and it is a perforated non-slip walking surface intended for safe, sturdy footing where slip resistance is required.
3) Will a stainless tread hold up in a wash-down or coastal plant?
Type 304 stainless is the finish here, which is the usual choice for wash-down food and beverage areas, water treatment, and chemical plants where a galvanized tread would corrode. The base material is steel formed in 16 gauge.
4) Is this the plank-style Grip Strut or a bolt-in stair tread?
This is the stair tread configuration, model T42016 36 SS, with the channel formed on the sides for mounting to stair stringers. If you need a flat walkway or platform surface instead, look at Grip Strut plank or grating rather than a tread.
5) Are mounting bolts or end plates included with the T42016 36 SS tread?
What ships is the tread itself. Stringer fasteners and any end or carrier plates are ordered separately, so size your bolts to the stringer flange and the 2 inch channel depth before the crew is on site.
6) How heavy is this stair tread to handle on site?
It is listed at 3.2 lb, so a single installer can set it without a lift. Light enough to carry up a stair run by hand, which matters on retrofit work in an occupied plant.
7) What gauge is the Grip Strut tread and does it matter for foot traffic?
16 gauge steel. Gauge sets how the tread spans between stringers, so lay out your stringer spacing around the 16 gauge, 2 inch channel section rather than assuming a wider span.
How fast can I get the B-LINE T42016 36 SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE T42016 36 SS come with a warranty?
Absolutely. The B-LINE T42016 36 SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE T42016 36 SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE T42016 36 SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.