B-Line Eaton series meter s, 2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$16,565.07
Image coming soon

B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, 042 kAIC, #6-250 MCM, MCB, Steel, Surface mount, 7 jaws, 1 positi

(No reviews yet) Write a Review

Model: U224 MTBH MS45

In Stock (leaves warehouse same day if ordered before 3pm ET)

$16,565.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, 042 kAIC, #6-250 MCM, MCB, Steel, Surface mount, 7 jaws, 1 position, 3Ø/4W, 22K AIC rated breaker

Manufacturer Resources

Product Specs

Amperage Rating:
200A
Certifications:
UL
Compliances:
EUSERC Approved
Interrupt Rating:
22 kAIC
Product Height:
30 in
Product Length Depth:
6 in
Product Weight:
58 lb
Product Width:
22 in
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Steel

B-LINE U224 MTBH MS45 – Frequently Asked Questions

1) Will the B-Line U224 MTBH MS45 meter breaker work on a three-phase four-wire 200 amp service?
Yes. The U224 MTBH MS45 is built for 3-phase, 4-wire service at 200 A, with a 7-jaw meter socket to match that configuration. Single-phase services use a 4-jaw or 5-jaw socket instead, so this is not the unit for a 1-phase residential drop.
2) Is this B-Line meter breaker enclosure rated for outdoor mounting?
It is a NEMA 3R enclosure, which is the standard rainproof outdoor rating for a service entrance on an exterior wall. Steel construction with an ANSI 61 gray painted finish. It surface mounts rather than recessing into the wall, so you need a flat exterior surface and the mounting hardware for it.
3) What wire sizes will the lugs on this 200 A meter breaker accept?
Terminations take #6 through 250 MCM conductors, which covers typical copper and aluminum service entrance cable at 200 A. If your service run uses parallel sets or anything larger than 250 MCM, this unit will not take it.
4) What is the short circuit rating on the U224 MTBH MS45, and does the breaker match it?
The enclosure is rated 42 kAIC and the installed main circuit breaker is rated 22 kAIC. The usable interrupting rating at the breaker is therefore 22 kAIC, so confirm your available fault current at the service point does not exceed that.
5) Will this B-Line meter socket pass a utility inspection that requires EUSERC construction?
It is EUSERC Approved and UL listed. EUSERC approval is what most western US utilities require for service equipment on their systems, so it is the right family of gear for those service territories. Always confirm the specific model against your serving utility's approved equipment list.
6) Does this unit have a ring type or ringless meter socket cover?
Ring type. The meter is retained by a sealing ring, which is what many utilities specify. If your utility standard calls for a ringless cover, this is the wrong variant and you need the ringless version of the same series.
7) How big is this meter breaker enclosure and how much does it weigh for a one-man install?
Dimensions are 30 in high, 22 in wide and 6 in deep, at 58 lb. That is a two-person lift for a wall set in practice, and you want the mounting anchors in place before it goes up. The 6 in depth is worth checking against any adjacent trim or gutter on the wall.
8) Does this B-Line meter breaker include a test block and how many breaker positions does it have?
A test block is built in, so the utility can test or bypass without pulling the meter. The enclosure has 1 position, meaning one main circuit breaker only. If you need multiple metered tenant positions, you need a multi-position meter pack instead of this single-position unit.
9) What is the model number to order on this Eaton B-Line meter breaker?
Order it as B-Line U224 MTBH MS45. That is the Eaton B-Line series combination meter socket and main breaker at 200 A, 7 jaw, 3-phase 4-wire, ring type, NEMA 3R.
How fast can I get the B-LINE U224 MTBH MS45 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE U224 MTBH MS45 come with a warranty?
Absolutely. The B-LINE U224 MTBH MS45 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE U224 MTBH MS45?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE U224 MTBH MS45 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!