B-Line Eaton series open racks, 67.375" height, 17.875" length, 12" width, Aluminum, RCM rack mounted double sided vertical cable manager cover, Dire

The Eaton B-Line SB864812D072FB vertical cable manager measures 67.375 inches high, 12 inches wide and 17.875 inches deep. That height corresponds to the usable vertical run alongside a full-height open frame rack, so plan for a channel 12 inches wide beside the rack rails and 17.875 inches of depth front to back before you set your row spacing.

Yes. The RCM rack mounted manager is a double sided vertical unit, so it routes and covers cable on both the front and back of the rack in a single channel rather than needing two separate single sided managers.

It is built for direct PDU mounting, so a rack power distribution unit fastens into the manager channel itself instead of eating a rack unit on the frame. That is the main reason data center and MRO buyers pick this version over a plain cable-only channel.

Gates and mounting hardware are called out as required items for this manager, so specify the number of low density plastic gates you need along with the mounting hardware when you place the order. Ordering the channel alone leaves you without the covers.

UL is the certification carried on the SB864812D072FB manager, which is typically what a facility or institutional spec asks for on rack infrastructure in a communications or equipment room.

The body is aluminum with a flat black powder coat, and the gate and trim components are black plastic. Overall color is black, so it lines up visually with standard black open frame racks and ladder rack in the same room.

The 12 inch channel is intended for openings with varying cable requirements, which means high and changing fiber or copper counts plus a PDU in the same channel. If your rack carries a modest fixed bundle and no in-channel power, a narrower vertical manager uses less floor space per row; go with the 12 inch when you expect the count to grow or you need the PDU mounted in the manager.