B-Line Eaton series open racks, 72.625" height, 17.875" length, 12" width, Aluminum, RCM rack mounted double sided vertical cable manager cover, Dire

The Eaton B-Line open frame rack vertical cable manager measures 72.625 in height, 17.875 in length/depth and 12 in width. That 12 in width is the space it occupies between racks or at the end of a lineup, and the 72.625 in height covers a standard full-height open frame rack run. Depth of 17.875 in means it manages cable both front and rear as a double sided manager.

Yes. The manager is built for direct PDU mounting, so vertical rack PDUs attach into the channel itself rather than eating rack units in the front rails. That keeps the 12 in wide channel doing double duty for power and cable routing on a double sided manager.

The required number of gates and the mounting hardware are included with the assembly, so nothing extra is needed to hang it on the rack. What is not part of the package is the open frame rack itself or the PDUs you intend to mount in it.

It uses low density plastic gates rather than a solid hinged panel. Gates let you push cable into the channel and pull it back out without removing a door, which suits an open frame data rack where cable counts change over time. The gates are black plastic components on a flat black powder coat frame.

Go double sided when the rack is served front and rear, patch fields on the front and equipment cabling out the back, which is the usual case on an open frame relay rack. This B-Line unit is a double sided vertical manager 17.875 in deep, so it carries both sides in one channel with gates on each face. A single sided manager only makes sense where the rack sits against a wall and all cable dresses to the front.

Finish is flat black powder coat with black plastic gate components, so it reads as black alongside standard black open frame racks. Frame material is aluminum, which keeps the weight at 35.5 lb for a full 72.625 in tall section, light enough for one person to position before bolting it up.