B-Line Eaton series open racks, 72.625" height, 17.875" length, 6" width, Aluminum, RCM rack mounted double sided vertical cable manager cover, Direc

Yes. The SB86486D078FB is an RCM rack mounted double sided vertical cable manager, so cable is managed on both the front and rear faces of the channel. The design allows unrestricted routing of cable, which is what you want when patch cords cross from switch ports to patch panels on both sides of an open frame rack.

The required number of gates and the mounting hardware are included with the assembly. The gates are low density plastic, and the other black components on the unit are plastic as well, so nothing extra is needed to close the channel once it is hung on the rack.

A full height 6 inch aluminum channel like the SB86486D078FB takes bundles off the rails entirely, carries them the full 72.625 inches of the frame, and gives you a place to mount a PDU directly. Rail mounted fingers only hold cable at the panel and do neither. Go with the channel where you have high port counts, both front and rear routing, and a PDU to locate; use rail fingers where you only need to dress a few jumpers and cannot give up 6 inches of floor width.

Order Eaton B-Line MPN SB86486D078FB. That number covers the 72.625 inch RCM double sided vertical manager in 6 inch width, 17.875 inch depth, flat black.

Finish is flat black powder coat over aluminum, with black plastic gates and trim. It reads as a matte black, not gloss, so it blends with standard flat black B-Line open frame racks rather than matching a glossy or textured cabinet finish.

It weighs 26.4 pounds. At 72.625 inches tall that is an awkward one person lift against a rack upright, so a second set of hands to hold it plumb while the mounting hardware goes in is the practical call.