B-Line Eaton series open racks, 84.875" height, 1.75" length, 2.625" width, Aluminum, RCM rack mounted vertical cable manager, Direct pdu mounting, H

At 84.875 inches tall, the B-Line Eaton RCM vertical cable manager matches the height of a standard 7-foot (84 inch usable) open frame rack, so it runs the full vertical span of the rack it mounts beside. Footprint is narrow: 2.625 inches wide and 1.75 inches deep. Confirm you have that much clear width between the rack upright and the next rack or wall before you set it.

Yes, direct PDU mounting is how the RCM manager is built. The channel accepts a vertical rack PDU mounted directly to it, so power and cable management share the same 2.625 inch wide column instead of eating rack units. Model SB86083S090SL.

Full length doors are included, hinged with a quarter-turn locking hinge. That keeps the bundles covered along the whole 84.875 inch height and lets a tech pop the door without tools when they need to drop a patch cord in.

The B-Line Eaton RCM vertical cable manager carries a UL certification, which is usually what a facilities or institutional spec is asking for on rack accessories in a communications room.

This one is a narrow-profile unit: 2.625 inches wide by 1.75 inches deep over an 84.875 inch height. That is sized for managing jumpers and PDU cords alongside a rack, not for consolidating a large horizontal patch field. If you are terminating hundreds of copper drops, plan on a wider double-sided manager channel instead.

Cable retention is by high density plastic fingers, and the plastic components are black while the aluminum body is silver powder coat. Plastic fingers rather than bare steel tabs means the fingers themselves are the bearing surface against the cable jackets.

The finish is silver powder coat on the aluminum, with black plastic components, which is the standard silver finish used across the Eaton B-Line open frame rack line. If your existing racks are the black powder coat version, this one will not match visually.