B-Line Eaton series open racks, 96" height, 12.75" length, 3.625" width, Rack mounted vertical cabling section dual hinging removable, Aluminum brush

The Eaton B-Line SB57163D096AL vertical cabling section is 96 inches tall, 3.625 inches wide and 12.75 inches deep. That 3.625 inch width is the footprint it occupies alongside the rack rails, and the 96 inch height matches a full-height open frame rack, so plan floor space and aisle clearance for a section that runs the entire rack from base to top.

Yes. The SB57163D096AL is a dual hinging, removable design, so the gate swings from either side and lifts off entirely for a quick cable install. That matters on a live rack where you are dressing new runs into an existing bundle and cannot work around a fixed cover.

It is an accessory, not a rack. The SB57163D096AL is a rack mounted vertical cabling section that attaches to an Eaton B-Line series open frame rack to route and contain cable vertically. You need the open frame rack itself separately.

The section is 12.75 inches deep front to back. On an open frame rack that depth is what determines how far the manager projects past the rails and how much bundle it will hold, so check it against your rail depth and any front door or aisle containment before mounting. If your runs are deeper than the channel, you are looking at a wider or deeper manager, not this one.

Brushed aluminum throughout. That gives a lighter section than a steel equivalent, 26.5 pounds for the full 96 inch height, which is worth knowing if one tech is hanging it on the rack alone.

Order by model SB57163D096AL, the brushed aluminum 96 inch dual hinging removable section. It ships assembled in a protective carton, so it comes ready to mount rather than as a flat pack of channel pieces.