B-Line Eaton series open racks, Aluminum, #12-24 mounting hardware, Telco gray powder coat, Low profile rack mounted shelf ventilated shelf

Yes. The B-Line SB745V1916ATG ventilated shelf is 17.25 inches wide, which is the panel width that spans a 19 inch EIA rack between the mounting rails, and it uses #12-24 mounting hardware, the thread B-Line open frame racks are tapped for. Depth into the rack is 16 inches.

The shelf deck runs 16 inches deep, so anything with a footprint deeper than 16 inches will hang past the back edge and needs support elsewhere. For a small switch or a power brick, 16 inches is plenty. Measure the deepest piece of gear you plan to set on it before you commit, especially on a two-post open rack where there is no rear rail to catch overhang.

It stands 3.42 inches tall, so plan on 2U of rack space (2U is 3.5 inches). That is why it is called a low profile shelf, it keeps vertical loss down compared with a deeper boxed shelf.

Aluminum, finished in Telco gray powder coat. The shelf itself weighs 3 lb, so it adds almost nothing to the rack load and one person can mount it. Aluminum also won't rust in a humid closet, and it is ventilated so heat from switches or media converters sitting on it can pass through rather than being trapped.

A ventilated shelf like the SB745V1916ATG is what you want for non-rack-mount gear that gives off heat, small switches, power supplies, media converters, since the perforations let air move through the deck. A solid shelf is the better pick when you are setting down paperwork, a keyboard, or small parts you don't want falling through. At 16 inches deep it carries a fair amount of equipment depth; a short cantilever shelf is the alternative when you only need to perch something small.

It should. The SB745V1916ATG is finished in the same Telco gray powder coat B-Line uses across its open frame rack line, which is the standard telecom equipment gray, so it blends with existing B-Line racks and relay racks rather than standing out like a black accessory.

Order model SB745V1916ATG from Eaton B-Line. That single part number covers the aluminum, Telco gray, ventilated low profile shelf at 17.25 inches wide by 16 inches deep by 3.42 inches high. There are no size or finish options to specify with it.