Eaton B-Line series open frame racks, Steel, #12-24 mounting hardware, Telco gray powder coat, Low profile rack mounted ventilated shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.42 in
- Product Length Depth:
- 16 in
- Product Weight:
- 8.7 lb
- Product Width:
- 17.25 in
- Department:
- Electrical
- Product Model:
- Low profile rack mounted shelf ventilated shelf
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
B-LINE SB745V1916STG – Frequently Asked Questions
1) Will the B-Line SB745V1916STG shelf fit a standard 19-inch open frame rack?
Yes. The Eaton B-Line SB745V1916STG is a rack mounted shelf built for 19-inch open frame racks, with an overall width of 17.25 inches so it sits between the rack rails and bolts to the mounting flanges. Depth is 16 inches, so confirm your rack has at least that much clear depth front to back for the gear you plan to set on it.
2) Does the B-Line SB745V1916STG shelf come with mounting screws?
It ships with #12-24 mounting hardware, which is the thread used on most tapped open frame telecom racks. If your rack rails are tapped 10-32 or are square hole cage nut rails, the included screws will not thread in and you will need the correct hardware for your rails.
3) Is this shelf ventilated, and does that matter for network gear?
The deck is ventilated, so heat from a switch, media converter, or small power supply set on it can rise through instead of being trapped against a solid pan. For passive gear or patch hardware a solid shelf is fine, but for anything with a fan or a warm case the vented deck is the one to take.
4) What is the exact part number to order this B-Line ventilated rack shelf?
Order Eaton B-Line part number SB745V1916STG. That number covers the low profile ventilated rack mounted shelf in Telco gray, 16 inches deep.
5) What is the B-Line rack shelf made of and how is it finished?
Steel construction with a Telco gray powder coat, which is the standard gray used across Eaton B-Line open frame racks so the shelf matches the rack rather than standing out against it.
6) Can one person install this rack shelf, or is it a two-man lift?
The shelf weighs 8.7 lb, so a single tech can hold it against the rails and start the screws without help. On a tall two-post rack it is still easier with a second person steadying it while the top screws go in.
7) Are there any listings or certifications on this B-Line shelf for a spec submittal?
No certifications apply to this shelf, it is recorded as Not Applicable. It is a passive steel mounting accessory, so a submittal should reference the rack itself for any listing requirements rather than the shelf.
How fast can I get the B-LINE SB745V1916STG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB745V1916STG come with a warranty?
Absolutely. The B-LINE SB745V1916STG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB745V1916STG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB745V1916STG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.