B-Line Eaton series open racks, Aluminum, #12-24 mounting hardware, Three mounting spaces required, Flat black powder coat, CPU/Monitor rack mounted

Three mounting spaces. The SB741V19AFB CPU/monitor shelf with keyboard extension needs three (3) rack mounting spaces, so plan 3U of clear front space when you lay out the rack elevation. Its overall height is 5.19 inches.

It mounts with #12-24 hardware, which is the standard thread on Eaton B-Line series open frame racks. If your rack rails are tapped 10-32 or use square-hole cage nuts, you'll need the matching #12-24 prep or hardware to land this shelf.

Yes. It's built for Eaton B-Line series open frame racks at 19 inch width, measuring 17.31 inches wide across the shelf with a 15 inch depth front to back. Check that nothing mounted directly below intrudes into that 15 inch depth, since the keyboard extension pulls forward of the rails.

Ventilated. The SB741V19AFB is a vented CPU/monitor shelf with a keyboard extension, so a monitor or small CPU sits on the shelf deck and the keyboard rides on the extension. The perforated deck lets heat off whatever sits on it rather than trapping it against the panel.

For an open frame rack where a tech needs a keyboard and monitor at the rack, the SB741V19AFB does the job in three mounting spaces: vented shelf deck for the monitor or CPU, with a keyboard extension in front. It's a shelf, not an enclosed sliding console drawer or a KVM console, so if you need a lockable, retractable surface inside a cabinet, this isn't that part.

Aluminum, finished in flat black powder coat, and it weighs 4.5 lb. The light weight is why it's a one-person install on an open rack, and the powder coat matches the black open frame racks in the same Eaton B-Line series rather than standing out against them.

Order it as Eaton B-Line SB741V19AFB. That's the flat black powder coat aluminum CPU/monitor rack mounted shelf with keyboard extension, ventilated, for 19 inch open frame racks with #12-24 hardware.