Eaton B-Line series open frame racks, Aluminum, #12-24 mounting hardware, Three (3) mounting spaces required, Mount to any flat surface, Flat black powder coat, Single sided rack mounted shelf solid shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 5.19 in
- Product Length Depth:
- 15 in
- Product Weight:
- 3.8 lb
- Product Width:
- 18.31 in
- Special Features:
- Three (3) mounting spaces required
- Department:
- Electrical
- Product Model:
- Single sided rack mounted shelf solid shelf
- Product Finish:
- Flat black powder coat
- Product Material:
- Aluminum
B-LINE SB747V1915AFB – Frequently Asked Questions
1) How much rack space does the Eaton B-Line SB747V1915AFB shelf take up in a 19-inch rack?
Three mounting spaces are required for the SB747V1915AFB shelf. Plan for 3 consecutive open holes-sets of rack space, and remember it mounts on one side only, so it cantilevers off the front rails rather than spanning front to rear.
2) What mounting hardware thread does this B-Line open rack shelf use?
It uses #12-24 mounting hardware, the standard thread on B-Line open frame racks. If your rack rails are tapped 10-32, the screws won't thread, so confirm the rail tapping before you order.
3) How deep is the SB747V1915AFB shelf, and will gear hang off the back?
The shelf measures 15 in deep, 18.31 in wide, and 5.19 in high. Anything with a chassis longer than 15 inches will overhang the rear edge, which matters because this is a single sided shelf with no rear support.
4) Is this a solid shelf or a vented shelf?
Solid, not vented. If you're setting equipment that dumps heat downward or relies on bottom intake, a vented shelf is the better choice; the solid pan suits patch panel gear, media converters, batteries and tools where you want a flat continuous surface.
5) Can this shelf be used somewhere other than a rack, like a wall or bench?
Yes, the design mounts to any flat surface as well as into rack rails, so you can fix it to a wall, a backboard, or a bench top where you need a 15 in deep flat platform without a full rack.
6) Is the B-Line SB747V1915AFB shelf aluminum or steel, and how much does it weigh?
Aluminum, weighing 3.8 lb. That light weight is the point of an aluminum single sided shelf: less dead load added to an open frame rack than a comparable steel pan, which matters when you're loading out a two-post rack near its capacity.
7) Will the finish match my existing black B-Line open frame racks?
The shelf comes in flat black powder coat, the same finish used across the Eaton B-Line series open racks, so it reads consistently alongside existing black B-Line frames and accessories in the same room.
How fast can I get the B-LINE SB747V1915AFB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB747V1915AFB come with a warranty?
Absolutely. The B-LINE SB747V1915AFB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB747V1915AFB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB747V1915AFB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.