You may also like
B-Line Eaton series open racks, Aluminum, Mounting units: 2, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
Model: BLN-SB750190602FB
Eaton B-Line series open frame racks, Aluminum, Mounting units: 2, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
B-LINE
$275.83
B-Line Eaton series open racks, Aluminum, 6 mounting units, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
Model: BLN-SB750230606FB
Eaton B-Line series open frame racks, Aluminum, 6 mounting units, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
B-LINE
$688.60
B-Line Eaton series open racks, Aluminum, 4 mounting units, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
Model: BLN-SB750230604FB
Eaton B-Line series open frame racks, Aluminum, 4 mounting units, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
B-LINE
$499.57
B-Line Eaton series open racks, Aluminum, Mounting units: 3, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
Model: BLN-SB750190603FB
Eaton B-Line series open frame racks, Aluminum, Mounting units: 3, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
B-LINE
$352.99
B-Line Eaton series open racks, Aluminum, Mounting units: 4, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
Model: BLN-SB750190604FB
Eaton B-Line series open frame racks, Aluminum, Mounting units: 4, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
B-LINE
$437.86
Eaton B-Line series open frame racks, Aluminum, 2 mounting units, Flat black powder coat, Wall mounted patch panel bracket 19" or 23" panel mount, hinged
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 6 in
- Product Weight:
- 4.5 lb
- Product Width:
- 23 in
- Department:
- Electrical
- Product Model:
- Wall mounted patch panel bracket 19" or 23" panel mount, hinged
- Product Finish:
- Flat black powder coat
- Product Material:
- Aluminum
B-LINE SB750230602FB – Frequently Asked Questions
1) Will this B-Line wall mount bracket take a 19 inch patch panel, or only 23 inch?
Both. The Eaton B-Line SB750230602FB is drilled for either 19 inch or 23 inch panel mounting, so the same bracket handles a standard 19 inch patch panel or the wider 23 inch telecom panel without a separate adapter. The overall width of the bracket is 23 inches.
2) How much rack space does this 2U wall bracket give me?
Two mounting units, which is 3-1/2 inches of vertical rack height. That takes a pair of 1U patch panels, or one 2U panel or shallow switch. The bracket stands 6 inches off the wall in depth, so plan cable bend radius and any equipment deeper than that accordingly.
3) Can I get behind the patch panel for termination once it is mounted on the wall?
Yes, this is a hinged bracket. The panel section swings away from the wall so you can reach the rear of the patch panel to punch down or dress cable, then close it back. That is the main reason to pick a hinged wall bracket over a fixed one in a tight closet.
4) Is a small hinged wall bracket enough, or do I need a full open frame rack?
For a couple of patch panels or a small switch in a closet or back-of-house room, a 2U hinged wall bracket keeps the gear off the floor and is a lot less work than standing a frame. At 3-1/2 inches of mounting height and 6 inches of depth it will not take deep servers, UPS units, or a stack of panels. Once you need more than 2U or deeper equipment, move to a floor-standing or full-height wall open frame rack.
5) Is this bracket heavy enough to need blocking or can it go straight into drywall?
The bracket itself is aluminum and weighs 4.5 lb, so the bracket is light. The load is the panel and the cable bundle hanging off it, not the bracket, so fasten into studs, plywood backboard, or use anchors rated for the finished load. Anchors are not supplied with the bracket.
6) What is the exact Eaton part number for the 2U hinged 19/23 inch wall patch panel bracket?
Order it as Eaton B-Line SB750230602FB. That number is the 2 mounting unit hinged wall bracket in flat black powder coat, drilled for 19 inch or 23 inch panels.
7) Will this B-Line bracket rust or corrode in an unconditioned telecom closet?
It is aluminum with a flat black powder coat finish, so it will not rust the way a plain steel bracket does, and the black coating matches typical black open frame racks and panels. It is intended for interior equipment rooms rather than exposed outdoor use.
How fast can I get the B-LINE SB750230602FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB750230602FB come with a warranty?
Absolutely. The B-LINE SB750230602FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB750230602FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB750230602FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.