B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,654.11
B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, Telco gray powder coat, #12-24 panel mounting holes, Wall-mounted net

B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, Telco gray powder coat, #12-24 panel mounting holes, Wall-mounted net

(No reviews yet) Write a Review

Model: SB704237430TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,654.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Telco gray powder coat, #12-24 panel mounting holes, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
74.25 in
Product Length Depth:
30 in
Product Weight:
27 lb
Product Width:
74.25 in
Department:
Electrical
Product Model:
Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
Product Finish:
Telco gray powder coat
Product Material:
Aluminum & steel

B-LINE SB704237430TG – Frequently Asked Questions

1) How much wall space and clearance do I need for the B-Line SB704237430TG wall-mounted rack?
Plan for a 74.25 inch tall footprint and 30 inch of depth off the wall for the SB704237430TG. That depth is the rack itself, so add room in front for cable service loops and in back for anything the extension brackets hold, plus your own working clearance in the closet.
2) Is the wall structure enough to carry a B-Line wall-mounted open rack?
The rack itself is light, 27 lb, with aluminum uprights and steel extension brackets, so nearly all of the load on the wall is the equipment you put in it plus the cable weight. Fasten the brackets into studs or solid masonry and size the anchors for the loaded weight, not the 27 lb bare rack.
3) What screws do I need to rack equipment in a #12-24 tapped B-Line open rack?
Mounting into the SB704237430TG takes #12-24 rack screws, since the uprights are tapped #12-24 rather than punched square for cage nuts. Order screws (and washers if your panels need them) separately along with the rack, and keep the thread consistent so spares fit every position.
4) Should I use a wall-mounted open rack or a floor-standing rack for a telecom closet?
A wall-mounted open frame rack like the SB704237430TG gets the gear off the floor and is the usual answer in a small closet or a room where floor space is committed, and open frame means every side stays reachable for cable management. Go floor-standing or to an enclosed cabinet instead when you need deep or heavy servers, lockable security, or when the wall cannot be anchored into structure. This one is described as heavy duty and needs 30 inch of depth, so the wall has to take a real bracket load.
5) Will the telco gray B-Line rack match the other racks already in my equipment room?
The SB704237430TG is finished in telco gray powder coat, the standard grey used across B-Line series open frame racks, so it reads the same as existing telco gray racks and ladder rack in the room. Powder coat over aluminum uprights also holds up to handling in a working closet better than paint.
6) Are the aluminum uprights on this B-Line rack a problem for grounding and bonding?
No, aluminum uprights are standard on B-Line series open frame racks and are normally bonded with a dedicated rack ground kit rather than relying on the frame finish. Because the uprights carry telco gray powder coat, scrape or use a paint-piercing washer at the bonding point so you land on bare metal.
7) What is the exact part number for the B-Line wall-mount open rack with telco gray finish and #12-24 holes?
Order it as Eaton B-Line SB704237430TG. That number covers the wall-mounted 19 inch open frame rack with aluminum uprights, steel extension brackets, telco gray powder coat, and #12-24 tapped panel mounting holes.
How fast can I get the B-LINE SB704237430TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB704237430TG come with a warranty?
Absolutely. The B-LINE SB704237430TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB704237430TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB704237430TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!