B-Line Eaton series open racks, Silver, Aluminum, Trays offer top and bottom adjustable cable support, Silver powder coat, Rack mounted horizontal tr

Yes. The tray is 19 inches wide, which is the standard EIA rack mounting width, and it mounts horizontally in the rack between equipment. Height is 3.5 inches, so it consumes 2U of rack space.

The tray projects 3.5 inches deep, so it is a shallow transition tray meant to sit at the face of an open frame rack rather than span front to rear. Plan on 3.5 inches of clear depth in front of any equipment behind it.

It does. The SB81319LTD3SL offers adjustable cable support on both the top and the bottom of the tray, so you can route one bundle over and another under the same tray and tune the support position to the bundle size.

Aluminum construction with a silver powder coat, which is the same finish used on the Eaton B-Line silver open frame racks, so it matches an existing silver rack line. The aluminum body also keeps it light at 4 pounds, easy for one tech to hold while starting the mounting screws.

It gives cable a supported path where it leaves a vertical manager and turns into the rack toward patch panels or switches, instead of hanging on the connectors. This one is the 19 inch rack mounted style, 2U tall, so it bolts to the rack rails at the point where the bundle transitions. If your cable is running the full depth of the rack rather than crossing the front, a full depth rack shelf or ladder rack section is the better part.

Only the tray is covered under model SB81319LTD3SL. Rack screws are sized to the rail thread of your frame, 12-24 or 10-32 on most open racks, so pull them from your rack hardware kit or order a screw pack that matches your rails.