Eaton B-Line series open frame racks, Steel, (4) #12-24 Bolts and nuts, Telco gray powder coat, Bumper rail extension - network bay
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- 3.13 lb
- Product Width:
- 19.88 in
- Department:
- Electrical
- Product Model:
- Bumper rail extension - network bay
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
B-LINE SB592419X1TG – Frequently Asked Questions
1) What is the Eaton B-Line SB592419X1TG bumper rail extension used for on an open frame rack?
It's a bumper rail extension for a network bay on Eaton B-Line series open frame racks. It bolts on to extend the bumper rail run, and it ships with (4) #12-24 bolts and nuts so no separate hardware pack is needed to mount it.
2) Will the SB592419X1TG bumper rail extension fit a 19 inch equipment rack?
Yes. The extension measures 19.88 inches wide, which is the standard footprint for a 19 inch EIA rack frame, and it mounts with the included #12-24 bolts and nuts, the standard thread used on B-Line open frame racks.
3) Do I need to buy separate mounting hardware for this B-Line bumper rail extension?
No extra fasteners are required. Four #12-24 bolts and nuts come with the extension. If your rack uses a different thread, such as 10-32, you would need to source matching fasteners, since 12-24 is what's supplied here.
4) What finish is the B-Line network bay bumper rail extension, and will it match my existing gray racks?
Telco gray powder coat over steel. That's the same finish B-Line uses across its Eaton series open frame racks, so it matches an existing telco gray bay rather than standing out against it.
5) What part number should I order for the B-Line telco gray bumper rail extension?
Order Eaton B-Line SB592419X1TG. It's a single configuration, so there's no finish or size choice to specify, telco gray powder coat steel at 19.88 inches wide with the #12-24 hardware in the box.
6) How much does the SB592419X1TG extension weigh and how much space does it take up on the rack?
3.13 lb, with a stated 1 inch height and 1 inch length/depth and a 19.88 inch width. It's a low profile steel piece, so it adds negligible load and depth to the bay.
7) Is the bumper rail extension steel or aluminum?
Steel, finished in telco gray powder coat. That matters if you're running it in a damp or coastal room, where a coated steel part needs the powder coat kept intact to avoid corrosion.
How fast can I get the B-LINE SB592419X1TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB592419X1TG come with a warranty?
Absolutely. The B-LINE SB592419X1TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB592419X1TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB592419X1TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.