Eaton B-Line series open frame racks, Steel, #12-24 mounting hardware, 50 lb load capacity, Telco gray powder coat, Low profile rack mounted ventilated shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.42 in
- Product Length Depth:
- 19 in
- Product Weight:
- 10.7 lb
- Product Width:
- 21.25 in
- Department:
- Electrical
- Product Model:
- Low profile rack mounted shelf ventilated shelf
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
- Product Length:
- 19 in
B-LINE SB745V1919STG – Frequently Asked Questions
1) Will the B-Line SB745V1919STG shelf fit a standard 19 inch open frame rack?
Yes. The SB745V1919STG is a rack mounted ventilated shelf built for 19 inch open frame racks, with a 19 inch depth and an overall width of 21.25 inches (the extra width is the mounting flanges that span the rack rails). It mounts with #12-24 hardware, which is the thread the B-Line series open frame racks are tapped for.
2) Is this B-Line shelf vented for equipment that runs hot?
Yes, it's the ventilated version. The steel deck is perforated so heat from a switch or appliance sitting on it can rise through instead of being trapped, which matters in an open frame rack with no forced air. If you want a solid deck for small items or loose parts, choose a non-vented flat shelf instead.
3) Do I need to buy screws separately for this rack shelf?
The shelf is supplied for #12-24 mounting hardware, the thread used on B-Line series open frame rack rails. If your rack is tapped 10-32 or uses square hole cage nuts, the #12-24 screws will not thread in and you will need the correct hardware for your rails.
4) Will a 19 inch deep piece of equipment sit on this shelf without hanging off?
The deck depth is 19 inches, so anything shallower than that is fully supported. Deeper equipment will overhang the front or rear edge, and with a 50 lb rating you should not cantilever heavy gear past the deck. For full depth boxes use rails or a deeper shelf.
5) What finish is the SB745V1919STG shelf, and will it match my existing B-Line racks?
Telco gray powder coat over steel, which is the same standard finish used across the Eaton B-Line series open frame racks and their accessories. If your existing frames are telco gray, this shelf matches them; it will not blend into a black rack.
6) How heavy is the shelf itself, and can one person hang it?
The shelf weighs 10.7 lb, so one person can hold it in place and start the screws, though on a tall open frame rack a second set of hands or a temporary support screw under each flange makes it easier.
How fast can I get the B-LINE SB745V1919STG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB745V1919STG come with a warranty?
Absolutely. The B-LINE SB745V1919STG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB745V1919STG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB745V1919STG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.