B-Line Eaton series open racks, Steel, Flat black powder coat, 200 lb load capacity, Double sided rack mounted shelf. Heavy duty, solid shelf

The SB596S23106SFB double sided rack shelf is rated at 200 lb load capacity. That is a heavy duty solid steel shelf, so it will carry non-rack-mount gear like a UPS brick, converters, media units or tooling rather than just paperwork. The shelf itself weighs 15 lb, which matters when one person is holding it in place while starting the rack screws.

Measurements are 23.31 in width, 20 in depth, and 6 in height. The 20 in depth is the usable shelf surface, so check that gear with deep rear cabling still clears inside your rack footprint before you commit.

The shelf measures 23.31 in across, which is wider than the 19 in equipment opening because the mounting flanges sit outboard on the rack rails. Standard 19 in rack rails are spaced on EIA centers, and this is an Eaton B-Line series open frame rack shelf, so it lands on those rails. Measure your rail-to-rail centers and your rear rail depth against the 20 in shelf depth if you are fitting it to an older or non-standard frame.

Flat black powder coat over steel, which is the standard finish across the Eaton B-Line open frame rack line, so it reads consistent with black racks and black rack accessories in a data or comms room. Powder coat over steel also holds up to scuffing from sliding equipment on and off better than a painted finish.