B-Line Eaton series open racks, Steel, 200 lb load capacity, Telco gray powder coat, Double sided rack mounted shelf. Heavy duty, solid shelf

The shelf is 23.31 inches wide overall, which covers the rack rail width plus the mounting flanges on each side, so it lands on standard open frame rack uprights. It is a rack mounted shelf built for Eaton B-Line series open frame racks. Depth is 30 inches, so confirm you have 30 inches of clear depth front to back before ordering, and the 6 inch height means it occupies roughly 3-1/2 rack spaces of vertical room.

Rated at 200 lb load capacity. That is enough for stacked switches, a UPS head unit, or test gear that has no rack ears of its own. It is a heavy duty solid shelf in steel, so equipment sits on a continuous surface rather than a vented or open frame tray.

Double sided means the shelf mounts to rails on both the front and rear of the rack rather than cantilevering off the front only. With 30 inches of depth and support at both ends, it is meant for a rack that gives you front and rear mounting points, not a single pair of front rails. If your frame only offers front rails, this is the wrong shelf for that opening.

Solid. The SB596V23156STG is a heavy duty solid steel shelf, so there is no perforation for airflow through the deck. If you are stacking heat producing gear and want convection through the shelf surface, look at a vented rack shelf instead.

Order Eaton B-Line MPN SB596V23156STG. It is a single configuration: 23.31 inches wide, 30 inches deep, 6 inches high, telco gray.

Telco gray powder coat over steel, which is the standard gray used across Eaton B-Line series open frame racks and most telecom room hardware. If your existing racks and shelves are telco gray, this matches. It will not match a black or white powder coated rack.