B-Line Eaton series open racks, Steel, Telco gray powder coat, 200 lb load capacity, Double sided rack mounted shelf. Heavy duty, solid shelf

The B-Line double sided rack mounted shelf is rated for a 200 lb load. It's a heavy duty solid shelf, so the load sits on a continuous steel surface rather than a vented or partial tray, which suits stacking non-rack-mount gear like converters, batteries, or test equipment on an open frame rack.

It measures 23.31 x 30 x 6 in (width, depth, height) and weighs 18.5 lb. The 30 inch depth is the key number to check against your rack footprint, since a double sided shelf extends well past the mounting rails on both the front and rear.

A double sided shelf mounts to rails on both faces of the frame rather than cantilevering off the front only. Use it on two post open frame racks where the load is heavy or deep and you need support at both ends. The B-Line SB596V23153STG carries 200 lb and runs 30 in deep for that reason. If you only have front rails available or the gear is light and shallow, a single sided cantilever shelf is the simpler choice.

The shelf is finished in Telco gray powder coat, the standard color used across the Eaton B-Line open frame rack line, so it matches telco gray frames and accessories already in the room. The powder coat over steel also holds up in unconditioned MDF and IDF closets better than a painted finish.

The SB596V23153STG is a steel rack mounted shelf, a mechanical accessory with no electrical components, and no certification applies to it. If your spec calls for a listed assembly, that requirement falls on the rack and the equipment mounted in it, not on the shelf.

Order it as Eaton B-Line MPN SB596V23153STG. That number covers the 23.31 in wide by 30 in deep by 6 in tall solid steel shelf in telco gray powder coat, rated 200 lb.