You may also like
B-Line Eaton series open racks, Steel, Flat black powder coat, 54" rack mounting units spacing qty., Swing gate wall mount equipment rack, ASTM 569
Model: BLN-SB508096FB
Eaton B-Line series open frame racks, Steel, Flat black powder coat, 54" rack mounting units spacing qty., Swing gate wall mount equipment rack, ASTM 569
B-LINE
$1,842.14
B-Line Eaton series open racks, Steel, Flat black powder coat, 44" rack mounting units spacing qty., Swing gate wall mount equipment rack
Model: BLN-SB508084FB
Eaton B-Line series open frame racks, Steel, Flat black powder coat, 44" rack mounting units spacing qty., Swing gate wall mount equipment rack
B-LINE
$1,948.27
B-Line Eaton series open racks, Steel, Silver powder coat, 79" rack mounting units spacing qty., Swing gate wall mount equipment rack
Model: BLN-SB508084XUSL
Eaton B-Line series open frame racks, Steel, Silver powder coat, 79" rack mounting units spacing qty., Swing gate wall mount equipment rack
B-LINE
$2,217.74
B-Line Eaton series open racks, Steel, Telco gray powder coat, 44" rack mounting units spacing qty., Swing gate wall mount equipment rack, ASTM 569
Model: BLN-SB508084TG
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 44" rack mounting units spacing qty., Swing gate wall mount equipment rack, ASTM 569
B-LINE
$2,006.44
B-Line Eaton series open racks, Steel, Telco gray powder coat, 79" rack mounting units spacing qty., Swing gate wall mount equipment rack, ASTM 569
Model: BLN-SB508096TG
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 79" rack mounting units spacing qty., Swing gate wall mount equipment rack, ASTM 569
B-LINE
$2,147.96
Eaton B-Line series open frame racks, Steel, Flat black powder coat, 54" rack mounting units spacing quanity, Swing gate wall mount equipment rack, ASTM 569
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Material Details:
- ASTM 569
- Product Height:
- 84 in
- Product Length Depth:
- 25.25 in
- Product Weight:
- 110 lb
- Product Width:
- 23 in
- Special Features:
- 54" rack mounting units spacing qty.
- Surface Finish:
- Flat black powder coat
- Department:
- Electrical
- Product Group:
- Racks & Frames
- Product Subgroup:
- Racks
- Product Type:
- Swing gate wall mount equipment rack
- Product Details:
- Swing gate wall mount equipment rack
- Product Material:
- Steel
- Product Length:
- 25.25 in
B-LINE SB508084XUFB – Frequently Asked Questions
1) How much wall space and clearance do I need for this Eaton B-Line swing gate rack?
Plan on 23 inches of width and 84 inches of height against the wall, with 25.25 inches of depth off the wall. Because it is a swing gate design, you also need clear floor area beside it for the frame to swing out so you can reach cabling behind the equipment, so keep the adjacent wall and any door swing clear of that arc.
2) Can I hang this rack on a drywall stud wall, or does it need structural backing?
The rack itself weighs 110 lb empty, before any switches, UPS or patch panels go in. That load is carried entirely by the wall, so it wants solid structural backing, plywood backboard or lag fixings into studs or masonry, not drywall anchors. In a telecom room the usual approach is a fire rated plywood backboard already on the wall.
3) Is this B-Line rack UL Listed for an electrical or IT room install?
Yes, the SB508084XUFB is UL Listed, which is typically what a facility or institutional spec calls for on equipment racks in a communications or electrical room.
4) Should I use a swing gate wall rack or a floor standing open frame rack?
A swing gate wall mount like this one is the choice when floor space is tight, such as a closet, a back office or a corridor niche, and you still need rear access: the whole frame pivots away from the wall so you can terminate and dress cable behind the gear. A floor standing open frame is the better call when you are loading heavy UPS batteries or deep servers, or when the wall cannot take the 110 lb frame plus equipment.
5) Will standard 19 inch patch panels and switches mount to this Eaton B-Line rack?
Yes. It is an open frame equipment rack sized in rack mounting units, 54 of them, so any standard EIA rack unit gear bolts straight to the rails. Depth available is 25.25 inches, so check that any deep chassis you plan to mount stays within that.
6) What is this rack made of and will the finish hold up in a plant or garage environment?
Steel to ASTM 569, finished in flat black powder coat. Powder coat over steel handles the knocks and humidity of a mechanical room or back-of-house space better than a painted finish, and the flat black keeps it visually quiet in an exposed install.
7) What model number do I order for the 84 inch black B-Line swing gate rack?
Order Eaton B-Line part number SB508084XUFB. That is the 84 inch tall, 23 inch wide, flat black powder coat swing gate wall mount rack with 54 rack unit spacing.
How fast can I get the B-LINE SB508084XUFB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB508084XUFB come with a warranty?
Absolutely. The B-LINE SB508084XUFB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB508084XUFB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB508084XUFB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.