B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,815.29
B-Line Eaton series open racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 37 mounting spaces, Top angle style, Seismic Zone 4

B-Line Eaton series open racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 37 mounting spaces, Top angle style, Seismic Zone 4

(No reviews yet) Write a Review

Model: SB5568084TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,815.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 37 mounting spaces, Top angle style, Seismic Zone 4, closed duct unequal flange rack, 11 gauge

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge
Mounting Rails:
12-24 panel mounting holes
Product Height:
84 in
Product Length Depth:
84 in
Product Weight:
95 lb
Product Width:
23 in
Special Features:
37 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, closed duct unequal flange rack
Product Details:
Seismic Zone 4, closed duct unequal flange rack
Product Style:
Top angle
Product Material:
Steel

B-LINE SB5568084TG – Frequently Asked Questions

1) How many rack units does the B-Line SB5568084TG open frame rack hold?
The SB5568084TG gives you 37 mounting spaces on an 84 inch tall frame. That is the usable equipment height for switches, patch panels and rack-mount servers. If your gear list totals more than 37 RU you will need a second frame or a taller cabinet.
2) Will my rack-mount switches bolt straight into this B-Line rack, or do I need cage nuts?
The rails are punched with 12-24 panel mounting holes, so equipment fastens with 12-24 screws directly into tapped rail holes. No cage nuts or square-hole clips are involved. If your hardware shipped with M6 or 10-32 screws, order 12-24 rack screws to match.
3) Is this B-Line open rack rated for a seismic zone 4 install?
Yes. The SB5568084TG is built as a Seismic Zone 4 closed duct unequal flange rack in 11 gauge steel, which is the heavier frame used where seismic anchoring is required. It is UL Listed. Floor anchorage and any overhead bracing still follow your engineer's detail.
4) What footprint do I need to plan for this 84 inch open frame rack?
Plan on a frame 23 inches wide and 84 inches tall, with a listed depth dimension of 84 inches. It weighs 95 pounds empty, so it is a two-person set and lift onto the anchor pattern. Add your own service clearance front and rear for cabling.
5) What does the top angle style mean on a B-Line telco rack?
Top angle refers to the angle member across the top of the frame, which is what ladder rack and cable runway attach to when the tray lands on the rack. If your design brings runway overhead into the rack top, this is the configuration you want.
6) Does this open rack come with side panels or a door?
No. This is an open frame rack, not an enclosure. There are no side panels, no doors and no locking. Equipment is exposed on all four sides for airflow and cabling access. If the room is not secured or you need containment, specify an enclosed cabinet instead.
7) Is the telco gray finish on this rack going to match the racks already in my MDF?
The frame is steel with a telco gray powder coat, the standard finish on telecom equipment racks, so it lines up visually with existing telco gray frames and runway in an MDF or IDF. Powder coat over steel also holds up better to cart knocks than a painted finish.
8) What is 11 gauge steel worth on a rack frame?
Eleven gauge is the heavier steel used on racks carrying loaded switch and server stacks, and it is what pairs with the Seismic Zone 4 unequal flange construction here. Lighter gauge frames are fine for patch panels but flex under concentrated equipment weight.
How fast can I get the B-LINE SB5568084TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5568084TG come with a warranty?
Absolutely. The B-LINE SB5568084TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5568084TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5568084TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!