B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,013.96
B-Line Eaton series open racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 75 mounting spaces, Top angle style, Seismic Zone 4

B-Line Eaton series open racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 75 mounting spaces, Top angle style, Seismic Zone 4

(No reviews yet) Write a Review

Model: SB5841108TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,013.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 75 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
92 lb
Product Width:
19 in
Special Features:
75 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Style:
Top angle
Product Material:
Steel
Product Length:
108 in

B-LINE SB5841108TG – Frequently Asked Questions

1) Will a 19-inch rack panel or patch panel mount directly in the B-Line SB5841108TG open rack?
Yes. The Eaton B-Line SB5841108TG is a 19 inch wide open frame rack, which is the standard EIA rack width for patch panels, switches and rack-mount panels. Rails are punched with 12-24 panel mounting holes, so panels thread straight into the rails without cage nuts.
2) Do I need cage nuts or 10-32 screws for this B-Line open rack?
Neither. The rails on the SB5841108TG are tapped for 12-24 hardware, so you order 12-24 rack screws. Cage nuts are for square-hole racks and will not be used here, and 10-32 screws will not thread into a 12-24 hole.
3) How much rack space do I get, and how tall is the frame?
75 mounting spaces on a frame 108 inches tall. That is a full-height telco rack, so check your ceiling clearance and any overhead cable ladder or tray height before you set it. It is 19 inches wide and weighs 92 lb.
4) Is this rack suitable for a data room in a high seismic area like California?
The SB5841108TG is built as a Seismic Zone 4 network bay open duct rack, Zone 4 being the highest of the legacy UBC seismic zones. It is also UL Listed. Anchoring to the slab and bracing to overhead structure per the engineer of record is still what makes the installation compliant.
5) Should I use an open frame rack like this or a fully enclosed cabinet?
An open frame two-post rack like this B-Line telco bay gives you access from all sides and the best airflow, and it is what most MDF and IDF rooms use for patch panels, blocks and network gear. Choose an enclosed cabinet instead when you need locked physical security, dust protection, or the room is shared or publicly accessible. Open racks also carry no doors or side panels, so any cable management or vertical duct is ordered separately.
6) What does the top angle style mean on this B-Line rack?
Top angle refers to the angle-formed member across the top of the frame, which is what runway or cable ladder gets attached to when you tie the bay into an overhead ladder rack system. If your room is built around butt-plate or bracket-mounted runway instead, confirm the connection method before you order the ladder hardware.
7) What is the finish, and will it match the other racks in my telecom room?
Telco gray powder coat over steel, which is the standard finish on telco equipment bays, so it lines up with typical existing gray rack lineups. Powder coat holds up better than paint against handling scuffs during install.
How fast can I get the B-LINE SB5841108TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5841108TG come with a warranty?
Absolutely. The B-LINE SB5841108TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5841108TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5841108TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!