B-Line Eaton series open racks, Telco gray powder coat, 200 lb load capacity, Aluminum, Shelf and sliding keyboard drawer

Yes. The SB7441910TG shelf with sliding keyboard drawer is built at 19 inches wide, which is the standard EIA rack mounting width used on Eaton B-Line open frame racks and two-post/four-post cabinets. It projects 10 inches deep and stands 4.75 inches tall at the front panel, so allow that much vertical space in your rack elevation plus clearance for the drawer to slide out.

It is rated for a 200 lb load. That is enough for a monitor, a small UPS, test gear, or a KVM sitting on the shelf, with the keyboard riding on the slide-out tray below. The shelf itself weighs 12.5 lb, which matters if you are hanging it off a two-post rack where every pound is cantilevered off the front rails.

Aluminum, finished in Telco gray powder coat. Aluminum keeps the unit light at 12.5 lb while still carrying a 200 lb load, and it will not rust in a humid or unconditioned telecom closet. The Telco gray powder coat is the same family of finish used on standard telco open frame racks, so it blends with existing gray rack gear rather than standing out.

No. This is a combination unit: a fixed equipment shelf with a sliding keyboard drawer built into it, so one rack position handles both the monitor or KVM surface and the keyboard. Buying a shelf and a separate slide-out tray would consume two mounting positions instead of one.

The shelf body runs 10 inches deep from the mounting rails, so it suits shallow two-post open frame racks as well as full cabinets. Anything deeper than 10 inches, such as a full-depth monitor, will overhang the back of the shelf, so measure the footprint of what you plan to set on it before you commit.

Order Eaton B-Line SB7441910TG. That single number covers the 19 inch wide aluminum shelf with the sliding keyboard drawer in the Telco gray powder coat finish; there are no separate finish or size codes to specify.