B-Line Eaton series open racks, Telco gray powder coat finish, 200 lb load capacity, Aluminum, Shelf and sliding keyboard drawer

The SB7442315TG is a 23 inch wide shelf with a sliding keyboard drawer, built for Eaton B-Line series open frame racks. The 23 inch width covers the rack uprights rather than just the 19 inch mounting opening, so plan on that footprint plus clearance at each side when you are laying out aisles or a wall-adjacent rack.

Depth is 15 inches front to back and overall height is 4.75 inches. In rack terms that 4.75 inch height works out to roughly 2 to 3 rack units of vertical space, so leave that much clear in your panel layout. The 15 inch depth suits a monitor or laptop on the shelf with the keyboard drawer sliding out below.

Rated for 200 lb load capacity. That is ample for a rackmount monitor, a KVM, a laptop, or test gear used at the rack, and it is why the shelf works as a permanent operator station rather than just a parts tray.

Aluminum, finished in Telco gray powder coat. Aluminum keeps the unit light, 15.8 lb, which matters when you are mounting it overhead in an already loaded rack by yourself. The powder coat is the same Telco gray used across Eaton B-Line open frame rack accessories, so it matches existing frames and panels in a build-out.

No. The keyboard drawer is integral to the unit, sliding out from under the fixed shelf surface, so one part number gives you both the equipment shelf and the keyboard position. You still supply the rack mounting hardware to suit your uprights.

An open frame shelf like the SB7442315TG mounts to two-post open relay racks and is meant to be reached from the front, with the keyboard drawer pulling straight out into the aisle. If your gear lives in a locked enclosure, or you need security or dust control, a cabinet-mount sliding shelf is the better choice. For a telecom or MDF room where the racks are open and techs work standing at the frame, this is the right type.