B-Line Eaton series open racks, UL 94V-0 plastic, Flat black powder coat, Used with , , cable managers, RCM Cable management plastic cable retaining

It is a plastic retaining gate for the RCM cable management system on Eaton B-Line series open frame racks. The gate spans the front of a vertical or horizontal cable manager channel to hold bundled patch cords inside the channel so they don't spill out into the rack aisle. It is a retaining accessory only, not a manager itself, so you need the cable manager it mounts to as well.

The gate measures 6 inches wide, .96 inches high and .251 inches deep, so it suits a 6 inch wide cable manager opening. For a narrower or wider channel in the same RCM family, order the gate sized to that channel width instead.

The gate is molded from UL 94V-0 plastic, which is the vertical burn classification data center and telecom specs usually call for on plastic cable management components. That is the only rating stated for the part.

It is finished in flat black powder coat, the same finish used on the Eaton B-Line series open frame racks and their cable managers, so it blends with an existing black rack line rather than standing out on the front of the channel.

Yes. Each gate weighs .26 lb and is a shallow .251 inch deep plastic piece that mounts to the face of the manager channel, so it goes on in front of cable already dressed in the channel. Gates are a common MRO stock item for this reason, since they get broken or lost during moves and adds.