You may also like
B-Line Eaton series runway shelf bracket, Telco gray, Used with 3/8" X 2" stringers, 9" runway width, Cable runway wall supports
Model: BLN-SB213S092TG
Eaton B-Line series runway shelf bracket, Telco gray, Used with 3/8" X 2" stringers, 9" runway width, Cable runway wall supports
B-LINE
$174.96
$147.58
B-Line Eaton series runway shelf bracket, Telco gray, Neoprene, Used with 3/8" X 2" stringers, 12" runway width, Cable runway wall supports
Model: BLN-SB213S122TG
Eaton B-Line series runway shelf bracket, Telco gray, Neoprene, Used with 3/8" X 2" stringers, 12" runway width, Cable runway wall supports
B-LINE
$177.53
$150.96
B-Line Eaton series runway shelf bracket, Telco gray, Steel, Used with 3/8" X 1-1/2" stringers, 12" runway width, Cable runway wall supports
Model: BLN-SB213S12TG
Eaton B-Line series runway shelf bracket, Telco gray, Steel, Used with 3/8" X 1-1/2" stringers, 12" runway width, Cable runway wall supports
B-LINE
$178.24
$152.66
B-Line Eaton series runway shelf bracket, Telco gray, Aluminum, Used with 3/8" X 2" stringers, 6" runway width, Cable runway wall supports
Model: BLN-SB213S062TG
Eaton B-Line series runway shelf bracket, Telco gray, Aluminum, Used with 3/8" X 2" stringers, 6" runway width, Cable runway wall supports
B-LINE
$166.53
$139.09
B-Line Eaton series runway shelf bracket, Yellow zinc, Neoprene, Used with 3/8" X 1-1/2" stringers, 9" runway width, Cable runway wall supports
Model: BLN-SB213S09YZ
Eaton B-Line series runway shelf bracket, Yellow zinc, Neoprene, Used with 3/8" X 1-1/2" stringers, 9" runway width, Cable runway wall supports
B-LINE
$175.36
$149.28
Eaton B-Line series runway shelf bracket, Telco gray, Neoprene, Used with 3/8" X 1-1/2" stringers, 9" runway width, Cable runway wall supports
Manufacturer Resources
Product Specs
- Application:
- 9 in runway width
- Certifications:
- UL Listed
- Product Height:
- 4.625 in
- Product Length Depth:
- 12 in
- Product Weight:
- 2.8 lb
- Product Width:
- 9 in
- Special Features:
- Telco gray
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Cable runway wall supports
- Product Details:
- Cable runway wall supports
- Product Material:
- Aluminum
- Product Length:
- 12 in
B-LINE SB213S09TG – Frequently Asked Questions
1) Will the B-Line SB213S09TG shelf bracket work with my 9 inch cable runway?
Yes, the SB213S09TG is sized for 9 inch runway width and is 9 inches wide to match. It mounts to the wall and carries the runway stringers, so use it only where your runway is actually 9 inches. A 12, 15, 18 or wider runway needs the matching width bracket, not this one.
2) What size stringers does this B-Line runway wall bracket accept?
It is made for 3/8 inch by 1-1/2 inch runway stringers, the common tubular stringer profile on Telco style cable runway. If your runway uses a different stringer section, this bracket is not the right support.
3) How far off the wall does the SB213S09TG bracket hold the runway?
The bracket runs 12 inches in length/depth and is 4.625 inches high, so plan on roughly a foot of projection from the wall face for the runway and the cable bundle sitting in it. Check that against rack clearance and any conduit or sprinkler lines on the same wall before you set your anchors.
4) Is this bracket aluminum or steel, and will it hold up in a data room or telecom closet?
Aluminum, finished in Telco gray, the standard look for telecom and data center runway. Aluminum keeps the weight down at 2.8 lb per bracket, which matters when you are setting a long wall run overhead by yourself. The neoprene detail isolates the runway from the bracket at the contact point.
5) Do I get wall anchors or stringer hardware with the SB213S09TG?
Order the bracket as the bracket. It is supplied as a runway wall support for 3/8 x 1-1/2 inch stringers, and the wall anchors need to be chosen for your substrate (concrete, CMU, or steel stud with backing). Budget one bracket per support point along the wall run per your spacing.
6) What is the exact part number to order this 9 inch Telco gray runway bracket?
Eaton B-Line part number SB213S09TG. The S09 in the number is the 9 inch runway width and TG is the Telco gray finish, so the same series in other runway widths carries a different width code.
How fast can I get the B-LINE SB213S09TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB213S09TG come with a warranty?
Absolutely. The B-LINE SB213S09TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB213S09TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB213S09TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.