Eaton B-Line series runway shelf bracket, Yellow zinc, Steel, Used with 3/8" X 1-1/2" stringers, 6" runway width, Cable runway wall supports
Manufacturer Resources
Product Specs
- Application:
- 6 in runway width
- Certifications:
- UL Listed
- Product Height:
- 4.625 in
- Product Length Depth:
- 9 in
- Product Weight:
- 2.4 lb
- Product Width:
- 6 in
- Special Features:
- Yellow zinc
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Cable runway wall supports
- Product Details:
- Cable runway wall supports
- Product Material:
- Aluminum
B-LINE SB213S06YZ – Frequently Asked Questions
1) What stringer size does this Eaton B-Line runway wall bracket work with?
It is made for 3/8 in x 1-1/2 in runway stringers. Heavier or deeper stringer profiles will not seat correctly in it, so confirm your ladder rack side rail is the 3/8 by 1-1/2 inch section before ordering.
2) Do I need one of these brackets at every wall point, or is it a full runway support?
This is a wall shelf bracket, not the runway itself. Each bracket cantilevers one point of the 6 inch runway off the wall, so you order them in quantity along the run and supply your own wall anchors sized to the substrate (concrete, block, or steel stud backing). The stringers, splice kits and any threaded rod for ceiling sections are separate items.
3) How far off the wall does this runway shelf bracket hold the cable rack?
The bracket measures 9 in in length/depth and 4.625 in in height, so it carries the runway roughly nine inches out from the wall face. Use that figure when you are checking clearance to conduit, sprinkler lines or equipment on the wall behind the run.
4) Is this B-Line cable runway wall support UL Listed?
Yes, the SB213S06YZ runway shelf bracket is UL Listed, which is what most telecom rooms and inspected commercial installations want to see on the support hardware.
5) Does the yellow zinc finish hold up in a data room or indoor electrical closet?
Yellow zinc is a plated finish intended for dry indoor use, which covers typical telecom rooms, IDFs and electrical closets. For exterior or damp locations you want a hot dip galvanized or stainless support instead.
6) How much does the B-Line SB213S06YZ bracket weigh for shipping and handling?
Each bracket is 2.4 lb, so a box of them for a full room stays easy to handle by one installer. Model number to order is SB213S06YZ.
How fast can I get the B-LINE SB213S06YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB213S06YZ come with a warranty?
Absolutely. The B-LINE SB213S06YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB213S06YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB213S06YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.