B-Line Eaton series runway shelf bracket, Yellow zinc, Used with 3/8" X 1-1/2" stringers, 6" runway width, Cable runway wall supports

Yes, the SB213S062YZ carries a UL Listed rating, which is what most spec writers and inspectors want to see on runway support hardware in a telecom or equipment room.

The bracket projects 9 inches deep and stands 4.625 inches high, with a 6 inch width matched to the runway. Use the 9 inch depth to check your clearance behind the runway for conduit, sprinkler lines, or a rack that sits close to the wall.

What ships is the shelf bracket itself, model SB213S062YZ. Hardware to attach it to the wall (anchors or bolts suited to your concrete, block, or stud construction) is a separate order, as are the stringer-to-bracket fasteners if your runway kit did not include them.

A wall support like the SB213S062YZ carries the runway off a solid wall and is the simpler choice when the runway runs along a perimeter, through a doorway penetration, or into a rack lineup against the wall. Once the runway crosses open floor space away from a wall, you need overhead support from structure instead of this bracket. Many rooms use both: wall brackets on the perimeter runs, hangers over the open aisles.

Order Eaton B-Line part number SB213S062YZ. The SB213 designates the shelf bracket series, 062 the 6 inch runway width, and YZ the yellow zinc finish. Matching brackets in the same series cover the other runway widths.

Yellow zinc is a plated finish over the bracket for corrosion resistance in indoor service, the usual choice for telecom and electrical rooms. The bracket body is aluminum. It is a general indoor finish, so for genuinely wet or corrosive environments spec a stainless or hot dip galvanized support instead.

Each bracket weighs 2.4 lb. Add that per support point to the runway and cable weight when you size your wall anchors, and remember the anchors themselves are not supplied with the bracket.