B-Line Eaton series single sided distribution , 140" height, 123" length, 9.25" width, 5 vertical with 16 shelves, ASTM A36 structural steel, Telco gr

This configuration is built with 5 verticals carrying 16 shelves across a 123 inch run. That is the block-mounting capacity you are buying, so count the terminal blocks your cross connect needs against those 16 shelf positions before ordering. If you need more capacity, it comes from a frame with a different vertical and shelf count rather than from adding to this one.

Shipping weight on the SB60914005TG is 247.83 lb of steel before any terminal blocks or cable are added. That is a two-person or mechanical-lift set, and with a 140 inch height against a 9.25 inch width the frame is tall and narrow, so it is intended to be secured to the floor and typically braced overhead. Plan anchoring hardware and any auxiliary framing channel separately, since the frame ships as the structure itself.

A single sided frame like the SB60914005TG supports terminal blocks for central cross connects, with the blocks mounted on one face only. That is the right choice when the frame goes against a wall and all termination work happens from the front. If technicians need to work both faces, or you want to double block density in the same floor length, a double sided frame is the configuration to specify instead. Single sided also keeps the depth down to 9.25 inches, which matters in a tight equipment room.

Order it as Eaton B-Line SB60914005TG. That number covers the single sided universal distribution frame in the 140 inch high, 123 inch long, 9.25 inch wide size with 5 verticals and 16 shelves in Telco gray. Height, length, verticals and shelf count are all baked into that designation, so a different capacity or height is a different part number, not an option on this one.

Structure is ASTM A36 structural steel with a Telco gray powder coat. A36 is the standard mild structural steel grade, so the frame behaves like structural angle and channel rather than light sheet metal, and the powder coat gives an indoor equipment-room finish that matches typical central office gray. It is an interior product; nothing here indicates an outdoor or corrosive-environment coating.