B-Line Eaton series single sided distribution , 140" height, 123" length, 9.25" width, 8 vertical with 16 shelves, ASTM A36 structural steel, Telco gr

Single sided, like the SB60914008TG, is the one to use when the frame sits against a wall and all terminations are reachable from the front. Its 9.25 inch depth keeps it tight to the wall. A double sided frame is what you want for an island installation in the middle of a room, where you terminate from both faces and roughly double the block capacity in the same floor run. If your room layout forces the frame off the wall, single sided wastes the back side.

Eight verticals carrying 16 shelves, so two shelf levels per vertical across the 123 inch length. Those shelves are what the terminal blocks mount to for central cross connects, so count your block quantity against 16 shelf positions when you size the frame.

It is a universal distribution frame for a telecom or MDF room: it supports terminal blocks for central cross connects. The 16 shelves carry the blocks, the verticals take the cable, and the whole thing is the central point where incoming pairs cross connect to building distribution.

Order by manufacturer part number SB60914008TG. That number covers the single sided universal distribution frame at 140 inches high, 123 inches long, 9.25 inches wide, with 8 verticals and 16 shelves in telco gray. Terminal blocks, cable management, and anchors are separate items.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the common hot rolled structural grade, which is why the frame can carry loaded blocks over a 140 inch height without racking, and the powder coat gives a durable indoor finish that matches the standard telco gray of most central office and MDF equipment.