B-Line Eaton series single sided distribution end guard, 108" height, 94" length, 9.25" width, Supports terminal blocks for cross connects, Universal

It's the end guard for a single sided universal distribution frame, the vertical end member that closes off the frame run. The frame itself supports terminal blocks for central cross connects, so this is telecom/comms room framework rather than a general equipment rack. Order it as part of a frame build, not as a standalone rack.

Single sided means terminal blocks and cross connect wiring are worked from one face, which suits a frame set against a wall in a comms closet. If you need access from both faces to double the block capacity in the same floor footprint, a single sided frame is the wrong configuration and you should spec a double sided frame instead. The 9.25 inch width here reflects the single sided build.

108 inches high, 94 inches on the length/depth dimension and 9.25 inches wide. The 9.25 inch width is the key number for aisle planning, since a single sided frame is mounted against or away from a wall and the terminal blocks are accessed from one face only.

Steel, specified as ASTM A36 structural steel. That's the standard mild structural grade used for framework channel and angle, which is why these frames can be floor and ceiling braced and loaded with terminal block hardware.

No certification applies to this part. It's structural framework for a cross connect distribution frame, not an electrical device, so it isn't a listed product. If your spec calls for a listed assembly, that requirement lands on the active equipment mounted to the frame, not on the steel.

Listed at 13.153 lb. The weight is manageable for one person, but at 108 inches tall and 94 inches on the other dimension it's an awkward two-man carry through doorways and up stairwells regardless of how light it is.