B-Line Eaton series single sided distribution end guard, 96" height, 80" length, 9.25" width, Supports terminal blocks for cross connects, Universal

The Eaton B-Line SB60909611TG end guard measures 96 in height, 80 in length/depth, and 9.25 in width. Those numbers matter for two reasons on a telecom or MDF room layout: the 96 in height sets your ceiling clearance for standing it up, and the 80 in length/depth dictates how much floor run the frame section it guards occupies.

No. The SB60909611TG is built for the single sided universal distribution frame configuration. A double sided frame presents a different end profile, so you need the end guard matched to that frame type instead.

An end guard closes off the end of a single sided universal distribution frame. The frame itself supports terminal blocks for central cross connects, and the end guard protects the exposed end of that run, keeping jumper wire and blocks in from the aisle side. If you are building a single sided frame line-up for cross connect terminal blocks, you need one at each exposed end of the run, not one per bay.

Steel, specifically ASTM A36 structural steel. That is a plain carbon structural grade, so for anything other than a conditioned indoor equipment room you will want to confirm the finish handles the environment. The guard is the same material family as the frame uprights it mounts to, so there is no dissimilar metal concern at the fasteners.

The SB60909611TG end guard weighs 13.153 lb. It is a one-person carry, though at 96 in tall it is an awkward one, and lining it up to the frame uprights overhead is easier with a second set of hands than the weight alone suggests.