B-Line Eaton series strut electrical accessories, 1.62" height, 4.5" length, 1.62" width, Steel, Includes 3 cam screws, Tee strut joiner, Fits channel

The B768-26ZN is built for B-Line channel type B26. It joins strut in a tee configuration, so one run passes through and a second run lands perpendicular into it. If your strut on the job is a different B-Line profile, this fitting is not the one to order.

No extra fasteners needed for the fitting itself. The B768-26ZN ships with 3 cam screws, which is what secures the joiner into the channel. Anything anchoring the strut run to the building structure is a separate item.

It is 12 gauge steel with an electro-plated zinc finish. Twelve gauge is the standard heavy strut fitting thickness, and the zinc plating suits dry indoor runs; for wet, corrosive, or exterior locations a hot-dip galvanized or stainless fitting is the better call.

Yes, the B768-26ZN carries a UL Listing, which is what most inspectors and institutional specs want to see on strut support hardware for conduit and equipment racks.

A tee joiner like the B768-26ZN is for a true perpendicular junction where one strut run meets another end-on within the channel, and its cam screws lock it inside the channel so nothing protrudes on the face. Flat plates and angle brackets bolt across the outside of the strut and are what you want when you are splicing in line or building a corner where the channel faces are accessible. If the branch run dead-ends into the side of a through run, the tee is the correct part.